web statisticsweb stats Business Phone Systems Tech Talk Forum - VOIP & Cloud Phone Help

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
Page 1 of 2 1 2
#100582 10/18/11 11:46 AM
Joined: Mar 2008
Posts: 250
Member
OP Offline
Member
Joined: Mar 2008
Posts: 250
Man this vm hell week!We just replaced a voiceGate external VM on a Magix system and replaced it with a refurbished merlin mail rel:2. After setting up everthing, mail boxes and AA tree with sub menus, we start testing and no matter what extension you enter it goes to the CSO. It will folllow the sub menus but the final transfer to the extension do not work, even if you enter the extension directly it goes to the CSO. Then the thing that really make me suspious is if you call an extention directly from another extension you get their greeting and you can leave a message but the message light will not lite. I worked with the Avaya techs and they are still scratching their collective heads. This is the second VM we have put in blaming the problem on the refurbished equipment. I doubt 2 would have the same problem.
everything worked with the old VoiceGate. Was there something programmed special for the VoiceGate?

Avaya IP Office Help & Support Website
IP Office Help

Avaya IP Office Help & Support Website


FAQs, documentation, videos, updates, and support for the Avaya IP Office business phone system!
Everything you need to know about installing, upgrading, and troubleshooting IP 500v2 and IPO Server Edition systems.

#100583 10/18/11 02:02 PM
Joined: Jun 2001
Posts: 10,949
Moderator-Avaya
*****
Offline
Moderator-Avaya
*****
Joined: Jun 2001
Posts: 10,949
Almost sounds like your last VM port/ext isn't properly assigned.


Avaya SMB Authorized Business Partner. ACIS/APSS
ESI Certified Reseller/Installer
www.regal-comm.com
#100584 10/18/11 02:42 PM
Joined: Jul 2001
Posts: 3,342
Likes: 10
Moderator-Avaya-Lucent, Antique Tele
*****
Offline
Moderator-Avaya-Lucent, Antique Tele
*****
Joined: Jul 2001
Posts: 3,342
Likes: 10
Check that your voice mail ports are "Rotary Enabled"

#100585 10/18/11 05:36 PM
Joined: Mar 2002
Posts: 3,630
Moderator-Avaya, Nortel
Offline
Moderator-Avaya, Nortel
Joined: Mar 2002
Posts: 3,630
check what your extension length is programmed for as well.


Z-man
Avaya SME Authorized Partner
www.omniofficetech.com
#100586 10/19/11 03:01 AM
Joined: Mar 2008
Posts: 250
Member
OP Offline
Member
Joined: Mar 2008
Posts: 250
OK, the "ROtary Enabled" is that in the Hunt Type, I think it is set to circular now. The max extension lenght is set to 4, which is what the system uses. I dialed the 4 ports individually to be sure of the numbering. Don't know what else to check.

#100587 10/19/11 03:14 AM
Joined: Mar 2002
Posts: 3,630
Moderator-Avaya, Nortel
Offline
Moderator-Avaya, Nortel
Joined: Mar 2002
Posts: 3,630
Please check two things. Like Mike, said, make sure your 4 ports are properly assigned in the calling group. If not, it wont work.

Model numbers can get skewed sometimes. Is this a stand alone Merlin Mail, or a card slot mail like the 007 MLM, or Merlin Messaging? If you went to a card slot messaging, your voice mail ports would have changed from the original external mail ports.


Z-man
Avaya SME Authorized Partner
www.omniofficetech.com
#100588 10/19/11 10:11 AM
Joined: Mar 2008
Posts: 250
Member
OP Offline
Member
Joined: Mar 2008
Posts: 250
yes the ports did change, it's a merlin messaging rel 2. I did take the original ports out of the 770 hunt group. Is there any other place they would show up?

#100589 10/19/11 10:30 AM
Joined: Mar 2008
Posts: 250
Member
OP Offline
Member
Joined: Mar 2008
Posts: 250
Does it matter what slot it is in? It is currently in the last slot of the second cabinet.

#100590 10/19/11 11:32 AM
Joined: Jul 2001
Posts: 3,342
Likes: 10
Moderator-Avaya-Lucent, Antique Tele
*****
Offline
Moderator-Avaya-Lucent, Antique Tele
*****
Joined: Jul 2001
Posts: 3,342
Likes: 10
"Rotary Enabled" is NOT the hunt type - you will find it under the 3rd page of Extensions. It tells the Magix to accept ROTARY (pulse) dialing from the VM ports.

A VM hunt group should be set to Linear.

#100591 10/19/11 12:17 PM
Joined: Mar 2002
Posts: 3,630
Moderator-Avaya, Nortel
Offline
Moderator-Avaya, Nortel
Joined: Mar 2002
Posts: 3,630
Like Tommy said, Rotary Enabled. That will correct the MWL problem.

Also, what are your selector codes set to in your AA? sounds like they aren't set correctly.


Z-man
Avaya SME Authorized Partner
www.omniofficetech.com
Page 1 of 2 1 2

Link Copied to Clipboard
Forum Statistics
Forums84
Topics94,262
Posts638,696
Members49,757
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
211,098 Shoretel
187,709 CTX100 install
186,794 1a2 system
Newest Members
BPopilek, Rich F, LewisR, TDKs79, Buttinset
49,757 Registered Users
Top Posters(30 Days)
dexman 18
Toner 12
TDKs79 8
jc2it 4
teleco 4
Who's Online Now
1 members (Curlycord), 101 guests, and 252 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998-2024
Powered by UBB.threads™ PHP Forum Software 7.7.5