|
|
|
|
Joined: Mar 2001
Posts: 3,268
Member
|
|
Member
Joined: Mar 2001
Posts: 3,268 |
Working with customer who has old SX200 digital (two cabinets) with G1005 ENH software that is old too.
I know that "911 notification" is not a feature of this software, but ---is there anything I can program to give this customer some kind of notification when a guest has dialed "911"? I know that a new switch would fix him right up, but am trying first for a less expensive route. Any suggestions?
Thanks in Advance.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jul 2001
Posts: 1,985
Moderator-Mitel, NEC, Vodavi
|
|
Moderator-Mitel, NEC, Vodavi
Joined: Jul 2001
Posts: 1,985 |
I do this at a couple of different sites but it does it takes a dedicated co line. Connected to the co line is a device that senses the call, reads what ext. made the call, & rings a buzzer. Other buttons allow listening in or breaking into the conversation. They work very well. Made by a company called Wren Comm. https://www.wrencom.com/main.html
|
|
|
|
|
Joined: Jul 2003
Posts: 11
Member
|
|
Member
Joined: Jul 2003
Posts: 11 |
try this site. https://www.teltronics.com/products_services/ers/tes_sts.asp i installed a box on co side of a 200 light for 911 notify, i think it was one of the teledent systems. i beleive there was some programming in ars to send the extension number out on the trunk for the unit to capture, it had a remote unit that sat at the front desk that would alarm and display the extension number responsible for the call.
|
|
|
|
Forums84
Topics94,512
Posts639,934
Members49,844
| |
Most Online5,661
May 23rd, 2018
|
|
|
|
|
|
