sundance-communications.com Forums Telephony Discussion Phone & VoIP Systems Mitel Telephones & Systems SX-20

I was just wondering, a person i was doing some networking for on the data side, asked me a question about configuring a cordless phone on the SX-20, I've looked in my possible locations, but can't seem to find any doc's on such a mature system... can any direct me or help me out. This is installed in a Motel and the office phone, not attendant is the one they want cordless...

you can connect it to any analog port. Not sure what you mean by "configuring" it, you would program it the same as you would any analog phone. I have a SX20 manual for the 503 generic. I guess that shows how old I am.
mark

Coming from the nortel pbx world, I was just inquiring, there is a possibility of getting some work from this company, so I wanted to see if there was any configuring to be done, I dn't think it's digital since the switch has 2500/type sets hanging off it. Spo just putting an analog set, cordless or otherwise should work, how would a person get a copy of the manual...

That manual is available through the manuals link at the top of the page, along with many, many, others.
mark