sundance-communications.com/forum Forums TDM Business Telephone Systems Mitel Telephones & Systems mitel 200 sx digital

I am trying to program the last 6 ports on on a card (1-1-6-0)through (1-1-12-0)and i need a little assistance I can log in to maintenance then username is installer then my password but after that I dont see how to program an actual port I just want to caopy a port config to these 6 ports so normally on most PBX's this is done easily. also i onlyhave a feew options once I get logged in 1 = system 3 = diagnostics 5 = traffic meas. 6 = quit 7 = log 9 = reports any help?

You're loggong into the "Maintenance" side of the system, when you need to be logging in to the "CDE" portion.

Yeah i figured that one out. Now the terminal is hung and I cant get it to disconnect any thoughts?

disconect term wait 15 min reconect and try
cde installer + passw goto form 14 it should show all of the programed trks use same cos & cdn
then pull card out and set for gs or loop
then add these to the trunk group that there going to be used in. form 16. then go to console
press function att function, trunks ,inter trk #-att access -shoud get dail tone.

hope this helps

Oops, he's trying to program station ports, is he not? Should be in form 9.

ouch

Not to sound like a SA , but if all else fails . Read the manual first . It really does help . Formulate your game plan then proceed . I hope this BOA helps .

Hey guys thanks to all of you who replied even those who suggested reading the manual. I hate to feel like I have to qualify myself in order to ask for help but when I get a "read the manual" reply it ticks me off so here goes...
I am 38 now and started installing KSU's when I was 19. 1A2's were the flavor most chosen. Then SL1's. After that it was more of a who has the regional market shares than brand name dominance as to what we installed. Hitachi, Comdial, telrad, Nortel, AT&T, a little Mitel later on in the 80's. But let me assure you I have read my share of manuals there hasnt always been tech forums. So I ask you is it really even worth a post if all you are going to say is I dont mean to sound like a "SA" but read the manual and just to let you know that when people say not to sound like a SA but... that is the biggest cop out because that is precisely what you are trying to sound like. In all actualality you could say "read the manual" to every post, why pick mine?

Tip_Ring

If I said any thing crass . It was not my intention . I am just an old , been in the trenches too long telecom tech . If you look at my profile I am 105 years old :rofl: . Any time you need Mitel help Email me . Please

So the big ? is......... did ya git 'er done? And OBTW, if you are 105 then I must be 205, or else I didn't age very gracefully. Or is the pic 60+ years old?
Seriously, Tip_Ring, did you accomplish the task? If not, e-mail me and lets get it done. John