sundance-communications.com/forum Forums TDM Business Telephone Systems Mitel Telephones & Systems Paging

Hi all-

I was hoping one of you could shed some light on this. I am not too familiar with any Mitel systems, but I'm trying to help an orginization that recently acquired a Mitel system (not sure what kind, either a SX-200 or 2000 probably, possibly a SX-50) and they want to know if there is a code that they can dial to access the external paging from the analog phones they have installed. They can page from the superconsole by pressing PAGE, but are not sure how to page from the analog phones. Can anyone help-I've tried having them dial 12, 130, etc. but their extensions are in the 100 range, so they are just calling an extension, 60 gets a stutter and then back to dial tone and **9 doesn't work because when * is entered, a busy tone is heard.

Am I overlooking something? Did the previous system user change something?

Thanks in advance for your help!

Here's what we know. If there's a Super Console 1000, it's not an SX50 or an SX200 Analog.
The problem you'll have is that the systems come delivered with an entirely blank database.
The only thing I can tell you is that the paging code IS NOT the same as any other code you're already using, but could be ANYTHING else.
You've got to log into the programming mode, and go to form 2 "Feature Access Codes".