Mitel SX-200 Need some help.

Print Thread

Rate Thread

Page 2 of 2

Re: Mitel SX-200 Need some help. #105064 11/14/06 05:11 PM
Joined: Aug 2005 Posts: 2,125 salinas, CA, USA telephoneguy Member
telephoneguy Member Joined: Aug 2005 Posts: 2,125 salinas, CA, USA	If it's a SS1000, It would run from a narrow dark card in the lower cab., called a DNIC card. The card position is relevant to the physical connection, so if you roll cards for tests, put them back. \| VBC Salinas \| Valley Baptist Church, Salinas - worship and prayer for Salinas California

Atcom VoIP Phones

Best VoIP Phones Canada

Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Re: Mitel SX-200 Need some help. #105065 11/14/06 05:12 PM
Joined: Aug 2005 Posts: 2,125 salinas, CA, USA telephoneguy Member
telephoneguy Member Joined: Aug 2005 Posts: 2,125 salinas, CA, USA	If it's a SS1000, It would run from a narrow dark card in the lower cab., called a DNIC card. The card position is relevant to the physical connection, so if you roll cards for tests, put them back. \| VBC Salinas \| Valley Baptist Church, Salinas - worship and prayer for Salinas California

Re: Mitel SX-200 Need some help. #105066 11/22/06 05:24 AM
Joined: Oct 2006 Posts: 12 Coeur d'Alene Jeff Bear Member
Jeff Bear Member Joined: Oct 2006 Posts: 12 Coeur d'Alene	The Console could run from two different types of cards. It may be the older style that runs from a module on the universal card or a Superconsole that runs from the DNIC 9109-012-000 The SC1000 is a single pair, I believe has to be in a high-power slot to run a console. The waiting for comm message should only appear for about 30 seconds at the most and then it should come up. If it is still at waiting for comm, it may be connected to the wrong port,(card type)or something else with the wiring-card-port type configuration. I haven't seen any (that I can recall) consoles that went to waiting for communication where the console was bad. It really sounds like the wrong port, programming, or wiring that is causing this. Is this thing still broke? Jeff

Re: Mitel SX-200 Need some help. #105067 11/22/06 05:26 AM
Joined: Oct 2006 Posts: 12 Coeur d'Alene Jeff Bear Member
Jeff Bear Member Joined: Oct 2006 Posts: 12 Coeur d'Alene	If you are getting an alarm on the cards, that will be the problem. Give me a call and I will help you out with what is causing the alarm on your cards. Jeff

Re: Mitel SX-200 Need some help. #105068 11/22/06 05:26 AM
Joined: Oct 2006 Posts: 12 Coeur d'Alene Jeff Bear Member
Jeff Bear Member Joined: Oct 2006 Posts: 12 Coeur d'Alene	Sorry, 208-818-9239 is my number

Page 2 of 2

Hop To

Link Copied to Clipboard

sundance-communications.com/forum Forums TDM Business Telephone Systems Mitel Telephones & Systems Mitel SX-200 Need some help.