web statisticsweb stats Business Phone Systems Tech Talk Forum - VOIP & Cloud Phone Help

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
Page 2 of 2 1 2
#105537 03/20/07 11:37 AM
Joined: Feb 2007
Posts: 2,473
Member
Offline
Member
Joined: Feb 2007
Posts: 2,473
To dial into the port with no answer on Mitel doesn't means nothing. Did you go into Maintenance to take a look on the status of that port. Is it idle or busy out? Do not forget that last port is responsible for MW light ON & OFF. If this is busy Hottel take it out of Hunt Group in Form 17. Leave it alone to turn MWL.Because if calls comes into port 4 at the time what ever port doing its main job(MW)it would not Answer.
set up Hunt Group for Terminal not Circular hunting. In this case ring would come to first port in the group first and will hunt in order.

Atcom VoIP Phones
VoIP Demo

Best VoIP Phones Canada


Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

#105538 03/20/07 06:29 PM
Joined: Mar 2007
Posts: 54
Member
Offline
Member
Joined: Mar 2007
Posts: 54
Yes, i have monitored it. All the ports are idle, you see it ringing when you call it, just ring no answer, and back to the console. Again this is the 5th card. The very first replacement was due to lightning. We have had numerous technicians to the property, and no answer can be found.

BTW- I am the tech that has been handling this.

#105539 03/20/07 09:32 PM
Joined: Aug 2005
Posts: 2,125
Member
Offline
Member
Joined: Aug 2005
Posts: 2,125
Long-shot... When handling the card, are you using anti-static protection? I have seen static causing problems... We had sales agents with headsets plugging in after crossing a newly carpeted floor, knocking DNIC cards offline.

#105540 03/22/07 02:52 AM
Joined: Mar 2007
Posts: 54
Member
Offline
Member
Joined: Mar 2007
Posts: 54
I would agree, but the chances of blowing 5 cards from static is far fetched. I reprogrammed they're 5th card about 2 weeks ago, still running now. I can promise you within two more weeks that card will be dead.

#105541 03/22/07 03:03 AM
Joined: Oct 2004
Posts: 1,057
Member
****
Offline
Member
****
Joined: Oct 2004
Posts: 1,057
What are the chances that the PMS conncection is causing the problem?? Voltage, ground, shorts etc.??
How about leaving the PMS cable unplugged for a while, and see if it lasts any longer??
It couldn't hurt! Just leave all of the mailboxes manually checked in.


www.ResaleSystems.com 24 x 7 Mitel Parts and Free Tech Support
#105542 03/22/07 03:28 AM
Joined: Mar 2007
Posts: 54
Member
Offline
Member
Joined: Mar 2007
Posts: 54
That is been what we have been thinking all along. The last card that went out was the first since we put surge protection on the interface. This last card that went out simply wouldn't answer, the interface worked fine. All the other cards that have gone out, the interface would go out, but the card would pick up and you could still check in the VM manually. We were thinking maybe coincidence that this last card quit working, since the interface had nothing to do with it.

#105543 03/22/07 05:38 AM
Joined: Feb 2007
Posts: 2,473
Member
Offline
Member
Joined: Feb 2007
Posts: 2,473
If only Notification port goes out all the time then maybe it is Interface problem!! Try to asign another port for MWL and see or that port will go bad as well.

#105544 04/10/07 03:47 PM
Joined: Apr 2007
Posts: 15
Member
Offline
Member
Joined: Apr 2007
Posts: 15
[QUOTE]Originally posted by SUNSHINE1234:
I hope someone can help! Situation: Hotel has an SX200 ML system with carded Express Messenger. The Express Messenger has stopped working an been replaced 6 times, yes I said (6). Guest can not make wake-up calls again! This system was put in 2004. It has all the protection one can have! The interface keeps going down. Micros/Fidelio said that their PMS is working fine. The Express Messenger this last time was moved to a different slot to elimate the slot it was in. We have used so many TC credits with Mitel an all they have done is replacement. PLEASE!!! Any Suggestions. [/QUOTED

DANGER WILL ROBINSON DANGER WILL ROBINSON!!!!
micros Fidelio is on my list and it isn't the Christmas list, this list begins with an "sh" and ends with a "t" get the point? I have had so many Micros prolems with ports I want to get sick when I see one, they use a USD to RS 232 Port box that fails and every time No matter what it's not their fault, it's always that dumb phone tech. The USB to RS 232 port server locks up the smdr or rs 232 ports in the telephone systems, this has happened to Hitachi 5100's, Mitel SX 200s and many others. I would check that port server it's a small inch tall by um 6 inch long by 3 or 4 inch deep box normally black in color and has between 4 to 8 rs232 ports to devices such as a smdr port.

I hope this helps.

Jim
231-535-5117


www.hospitalityphones.com, .net and .org are for sale at a reasonable price or offer.
I am now Retired and no longer need these URL's
#105545 04/18/07 11:22 AM
Joined: Apr 2007
Posts: 339
Member
Offline
Member
Joined: Apr 2007
Posts: 339
what slot is the MEM in? troubles with MEM above slot 5

Page 2 of 2 1 2

Link Copied to Clipboard
Forum Statistics
Forums84
Topics94,262
Posts638,696
Members49,757
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
211,098 Shoretel
187,707 CTX100 install
186,794 1a2 system
Newest Members
BPopilek, Rich F, LewisR, TDKs79, Buttinset
49,757 Registered Users
Top Posters(30 Days)
dexman 18
Toner 14
TDKs79 8
Who's Online Now
2 members (justbill, Toner), 132 guests, and 243 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998-2024
Powered by UBB.threads™ PHP Forum Software 7.7.5