|
Joined: Sep 2006
Posts: 16
Member
|
Member
Joined: Sep 2006
Posts: 16 |
I have a 3300ICP with 5 fax machines and all are connected via a Mediatrix 1102 (remote) 1204 (switch). Here is the problem: When we fax between machines connected via the ATA's everything is fine; but when we fax to an outside number or to a fax number connected through another PBX we get an error message of "line fault or "poor line condition" and the fax fails after the first page. The first page is received just about always; I have tried different fax machines, and many different setting combinations, but the issue is always the same. The Mediatrix are SIP and the Mitel is R7.0
If anyone has a solution it is appreciated.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Feb 2007
Posts: 2,473
Member
|
Member
Joined: Feb 2007
Posts: 2,473 |
|
|
|
|
Joined: Oct 2004
Posts: 1,057
Member
|
Member
Joined: Oct 2004
Posts: 1,057 |
VAD couldn't have said it any better!!! IP and fax just don't work well!!
|
|
|
|
Joined: Dec 2005
Posts: 7,056
RIP Moderator-Mitel, Panasonic
|
RIP Moderator-Mitel, Panasonic
Joined: Dec 2005
Posts: 7,056 |
I was standing back on this one, but, being the fool I am......... Panasonic 100 at work, found that if enough 'kludging' was done the faxes started going thru both ways on a PRI. (Kludging is an old expression I was introduced to in the AF. Means messing with the settings. Had a B & D TTY analyzer that we had to do an internal alignment on monthly, then it wouldn't work until we had a using agency with capability, send us a known 'trashy' signal, and we would 'kludge' the analyzer to agree, then send a 'trasy' signal at different error levels back and forth 2-3 times to confirm. All pots always ended up back where they started, of course.) Anyhow, don't know where to tell you to go on this one, but I know we had a LOT less problem, once we got rid of the slips on the PRI, that never affected voice! John C.
When I was young, I was Liberal. As I aged and wised up, I became Conservative. Now that I'm old, I have settled on Curmudgeon.
|
|
|
|
Joined: Sep 2006
Posts: 16
Member
|
Member
Joined: Sep 2006
Posts: 16 |
Thanks for the responses. I have Kludged this system as much as I care too; I get it to work for a while and then it goes stupid again. The customer is starting to think that I am doing it on purpose to get service calls. ;>) I have told the customer to install POTS lines for the faxes.
|
|
|
Forums84
Topics94,512
Posts639,933
Members49,844
|
Most Online5,661 May 23rd, 2018
|
|
1 members (muddybl),
234
guests, and
32
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|