Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
Page 1 of 2 1 2
PRI Outgoing Fine but Incoming Busy/Rejected Help!!!
#106420 08/28/07 09:26 AM
Joined: Feb 2007
Posts: 43
Member
OP Offline
Member
Joined: Feb 2007
Posts: 43
We are in the process of setting up a Mitel SX200 MX Revision 4.0. We have the PRI programmed and have been doing some testing.

Now we are able to make are out bound local and toll calls but when you try to call in on the DID it gives a fast busy (rejection) The only way we can get around this is by inputting either an VM box or Extention under Vacant under the forms. The problem is that all DID's will only ring to that extention.

What we are trying to do is allow the DID to ring to the extention for EX: DID 123-456-4185 Needs to ring to EXT 4185 But its not allowing us to do this. We want each DID to ring to its corresponding EXT/Station What forms do we need to change. By the way the PRI is on the T1 DID/Tie .


Greg Prunick
ICC USN RET
EMP & Lightning Home Surge Protection
EMP - Click Here!
Re: PRI Outgoing Fine but Incoming Busy/Rejected Help!!!
#106421 08/28/07 10:25 AM
Joined: Jul 2001
Posts: 1,985
Moderator-Mitel, NEC, Vodavi
*****
Offline
Moderator-Mitel, NEC, Vodavi
*****
Joined: Jul 2001
Posts: 1,985
I think you will have to create an extension under vacant & call fwd it to the desired extension via the console. DID's on a sx200 aren't the most friendly. Hope this helps.

Re: PRI Outgoing Fine but Incoming Busy/Rejected Help!!!
#106422 08/28/07 10:45 AM
Joined: Aug 2007
Posts: 12
Member
Offline
Member
Joined: Aug 2007
Posts: 12
Now the Hospitality Package that is in reference to this device is this why we cannot get the DID's to ring to the certain extentions on there own?

Re: PRI Outgoing Fine but Incoming Busy/Rejected Help!!!
#106423 08/28/07 10:51 AM
Joined: Oct 2004
Posts: 1,057
Member
****
Offline
Member
****
Joined: Oct 2004
Posts: 1,057
In form 15, how many digits are you expecting?
Are you SURE the carrier is ending the right digits?
Are you set up for caller ID??
If not, the carrier is sending * ANI * DNIS, and your system is looking for an extension that begins with *


www.ResaleSystems.com 24 x 7 Mitel Parts and Free Tech Support
Re: PRI Outgoing Fine but Incoming Busy/Rejected Help!!!
#106424 08/28/07 10:52 AM
Joined: Aug 2006
Posts: 1,136
Member
Offline
Member
Joined: Aug 2006
Posts: 1,136
Is this embedded PRI or is it in a peripheral bay?

Re: PRI Outgoing Fine but Incoming Busy/Rejected Help!!!
#106425 08/28/07 10:56 AM
Joined: Aug 2007
Posts: 12
Member
Offline
Member
Joined: Aug 2007
Posts: 12
Embedded PRI

And I will look at what I have in form 15 a second time. Will add in a second.

Re: PRI Outgoing Fine but Incoming Busy/Rejected Help!!!
#106426 08/28/07 10:56 AM
Joined: Aug 2006
Posts: 1,136
Member
Offline
Member
Joined: Aug 2006
Posts: 1,136
PM sent

Re: PRI Outgoing Fine but Incoming Busy/Rejected Help!!!
#106427 08/28/07 11:15 AM
Joined: Aug 2007
Posts: 12
Member
Offline
Member
Joined: Aug 2007
Posts: 12
I have the PRI on Bay 5 Slot 2 CCT 1

All 23 channels are in and I am using COS 7 COR 1 Ten 1 N 4 which the CO is giving us 4 Digits (Telnet is the CO) M 0 X (right now for X we have #6 as we were trying another route in regards to Digit Translation. The MOSS Info has Lodging which we cannot unload. And then CDN 2 is being used. What am I missing here. They were saying something about a * is what was being sent from the CO?

When we did the print out of the calls trying to come in we were getting:

Date - Time - Duration - Trunk Number - *** *906
337

in which 906 is the area code.

Re: PRI Outgoing Fine but Incoming Busy/Rejected Help!!!
#106428 08/28/07 11:20 AM
Joined: Oct 2004
Posts: 1,057
Member
****
Offline
Member
****
Joined: Oct 2004
Posts: 1,057
The * is the first digit of the * ani * dnis pattern.
Go to the class of service of the trunk, and enable option 811 (ANI Trunk).
That tells the system to ignore the *ani*, and just react to the dnis.


www.ResaleSystems.com 24 x 7 Mitel Parts and Free Tech Support
Re: PRI Outgoing Fine but Incoming Busy/Rejected Help!!!
#106429 08/28/07 11:30 AM
Joined: Aug 2007
Posts: 12
Member
Offline
Member
Joined: Aug 2007
Posts: 12
Given the information. This option is already Enabled. I'm just curious how a normal call is supposed to look under the print.

For some reason its not allowing the DID to route to the proper Extention

What we need is for ex:

DID 906-444-4185 to ring to Extention 4185 And everything is setup in COS correctly and trunks are there. But do I need to use Form 55 Digit Translation Table or can I just delete what I put in there and ignore it?

Page 1 of 2 1 2

Moderated by  DrPbx 

Link Copied to Clipboard
Forum Search
Most Recent 5 Post
7100 Lan Printer Error
by RM SYSTEMS - 09/28/20 02:27 PM
Caller wait list
by Hofman telekom - 09/28/20 11:27 AM
TDA50G power consumption
by kenc - 09/27/20 01:23 PM
Who's Online Now
25 members (Yoda, jab1780, BobRobert, metelcom, Hofman telekom, MooreTel, phonman123, Skunky, Carl Navarro, Touch Tone Tommy, Telesystems, newtecky, EV607797, nortelvoip, hitechcomm, hbiss, aweaver, RATHER BE FISHING, Keyset6, Bob3470, dexman, gertter, justbill, JBean3329, Coral Tech), 234 guests, and 55 robots.
Key: Admin, Global Mod, Mod
Popular Topics (Views)
Forum Statistics
Forums94
Topics93,975
Posts637,356
Members49,356
Most Online5,661
May 23rd, 2018
Today's Birthdays
betsy, Cabling Lady, jcorsell, MVSpeed, sherif
Newest Members
xware, Adam19871, tmr-afmk, Big Alan, simsh
49355 Registered Users
Get Tech Support Now! Click the banner below
Get Tech Support Now!
Top Posters (30 Days)
dexman 34
hbiss 12
teleco 10
ABLE1 10
Bluewater Sailing
https://www.patreon.com/bePatron?u=5256033
EMP Shield for Commercial - Home & Vehicle
Use Coupon code SAVE - Click Here!
Sold AD
Servpro Ventura 24-Hour Emergency Service
Free Estimates call us now 24Hours
Contact Us | Telephone System Tech Support | Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers.
©Copyright Sundance Communications 1998-2020
Trusted Partners