web statisticsweb stats Business Phone Systems Tech Talk Forum - VOIP & Cloud Phone Help

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
Page 1 of 2 1 2
Joined: Feb 2007
Posts: 43
Member
OP Offline
Member
Joined: Feb 2007
Posts: 43
We are in the process of setting up a Mitel SX200 MX Revision 4.0. We have the PRI programmed and have been doing some testing.

Now we are able to make are out bound local and toll calls but when you try to call in on the DID it gives a fast busy (rejection) The only way we can get around this is by inputting either an VM box or Extention under Vacant under the forms. The problem is that all DID's will only ring to that extention.

What we are trying to do is allow the DID to ring to the extention for EX: DID 123-456-4185 Needs to ring to EXT 4185 But its not allowing us to do this. We want each DID to ring to its corresponding EXT/Station What forms do we need to change. By the way the PRI is on the T1 DID/Tie .


Greg Prunick
ICC USN RET
Atcom VoIP Phones
VoIP Demo

Best VoIP Phones Canada


Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Joined: Jul 2001
Posts: 1,985
Moderator-Mitel, NEC, Vodavi
*****
Offline
Moderator-Mitel, NEC, Vodavi
*****
Joined: Jul 2001
Posts: 1,985
I think you will have to create an extension under vacant & call fwd it to the desired extension via the console. DID's on a sx200 aren't the most friendly. Hope this helps.

Joined: Aug 2007
Posts: 12
Member
Offline
Member
Joined: Aug 2007
Posts: 12
Now the Hospitality Package that is in reference to this device is this why we cannot get the DID's to ring to the certain extentions on there own?

Joined: Oct 2004
Posts: 1,057
Member
****
Offline
Member
****
Joined: Oct 2004
Posts: 1,057
In form 15, how many digits are you expecting?
Are you SURE the carrier is ending the right digits?
Are you set up for caller ID??
If not, the carrier is sending * ANI * DNIS, and your system is looking for an extension that begins with *


www.ResaleSystems.com 24 x 7 Mitel Parts and Free Tech Support
Joined: Aug 2006
Posts: 1,136
Member
Offline
Member
Joined: Aug 2006
Posts: 1,136
Is this embedded PRI or is it in a peripheral bay?

Joined: Aug 2007
Posts: 12
Member
Offline
Member
Joined: Aug 2007
Posts: 12
Embedded PRI

And I will look at what I have in form 15 a second time. Will add in a second.

Joined: Aug 2006
Posts: 1,136
Member
Offline
Member
Joined: Aug 2006
Posts: 1,136
PM sent

Joined: Aug 2007
Posts: 12
Member
Offline
Member
Joined: Aug 2007
Posts: 12
I have the PRI on Bay 5 Slot 2 CCT 1

All 23 channels are in and I am using COS 7 COR 1 Ten 1 N 4 which the CO is giving us 4 Digits (Telnet is the CO) M 0 X (right now for X we have #6 as we were trying another route in regards to Digit Translation. The MOSS Info has Lodging which we cannot unload. And then CDN 2 is being used. What am I missing here. They were saying something about a * is what was being sent from the CO?

When we did the print out of the calls trying to come in we were getting:

Date - Time - Duration - Trunk Number - *** *906
337

in which 906 is the area code.

Joined: Oct 2004
Posts: 1,057
Member
****
Offline
Member
****
Joined: Oct 2004
Posts: 1,057
The * is the first digit of the * ani * dnis pattern.
Go to the class of service of the trunk, and enable option 811 (ANI Trunk).
That tells the system to ignore the *ani*, and just react to the dnis.


www.ResaleSystems.com 24 x 7 Mitel Parts and Free Tech Support
Joined: Aug 2007
Posts: 12
Member
Offline
Member
Joined: Aug 2007
Posts: 12
Given the information. This option is already Enabled. I'm just curious how a normal call is supposed to look under the print.

For some reason its not allowing the DID to route to the proper Extention

What we need is for ex:

DID 906-444-4185 to ring to Extention 4185 And everything is setup in COS correctly and trunks are there. But do I need to use Form 55 Digit Translation Table or can I just delete what I put in there and ignore it?

Page 1 of 2 1 2

Link Copied to Clipboard
Forum Statistics
Forums84
Topics94,262
Posts638,697
Members49,757
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
211,100 Shoretel
187,712 CTX100 install
186,800 1a2 system
Newest Members
BPopilek, Rich F, LewisR, TDKs79, Buttinset
49,757 Registered Users
Top Posters(30 Days)
dexman 18
Toner 11
TDKs79 8
teleco 4
Who's Online Now
0 members (), 140 guests, and 24 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998-2024
Powered by UBB.threads™ PHP Forum Software 7.7.5