|
Joined: Jul 2006
Posts: 202
Member
|
OP
Member
Joined: Jul 2006
Posts: 202 |
Hello Again, I have an SX-200 EL, if someone calls in and is put on hold after about 3 or 4 mintutes of being on hold, the system just drops the call. Another thing that happens is that if you call in and no one answers it after about 10 rings, the system just cuts them off. I do not have a voice mail system. On the NEC system that i had, it never did this, nor do analog phones. So it has to be somewhere in the system programming of the SX-200. When i am in the control room by the system watching the lights i call in put my self on hold, non of the leds on the cards are lit except for trunk 1, and after 4 min. you hear a click click (the relay on the board im assuming) and the same thing happens for calls ringing in. You call in 10 rings later when non of the lights are on (except for trunk 1) you hear the relay click and your call has been droped. Thanks in advanced for all of your replies Thanks, Daniel
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Aug 2005
Posts: 2,125
Member
|
Member
Joined: Aug 2005
Posts: 2,125 |
I'd suggest checking the Night1 answer points.
So, are you an end user?
|
|
|
|
Joined: Sep 2006
Posts: 372
Member
|
Member
Joined: Sep 2006
Posts: 372 |
Check COS option 254 - Hold Recall Timer COS option 222 – Call forwarding inhibit on hold timeout
For the Ring N/A hang ups, check system option 51, Final Ring Timeout. Default is 1 minute.
JimmyV
"Well informed people know it is impossible to transmit the voice over wires. Even if it were, it would be of no practical value" Boston Post, 1865
|
|
|
|
Joined: Oct 2004
Posts: 1,057
Member
|
Member
Joined: Oct 2004
Posts: 1,057 |
The call is going on hold, then ringing back to the person who put them on hold. That person has left the room, and not answering the recall. That's when the final ring timer is cutting them off after 1 minute!
|
|
|
|
Joined: Jul 2006
Posts: 202
Member
|
OP
Member
Joined: Jul 2006
Posts: 202 |
Fred, 254 is set to 1 minute 222 is disabled Also 681 (Key System holt timer) is to 60 seconds 51 is set to 1 minute So if I change 51 from 1 minute to 30 minutes will this solve both problems or just one of them? Thanks, Daniel
|
|
|
|
Joined: Oct 2004
Posts: 1,057
Member
|
Member
Joined: Oct 2004
Posts: 1,057 |
Extending option 51 will stop the calls from dropping. All of thew other options should be set according to your preferences. Sounds like your REAL problem is the people don't answer their phone!!
|
|
|
|
Joined: Jul 2006
Posts: 202
Member
|
OP
Member
Joined: Jul 2006
Posts: 202 |
Yep, Its an office and they are lazy because the receptionist just left their company so now they have calls ringing every phone in the office and they are too lazy to answer the phone because they think the recep. is going to get it. LOL Thanks, Daniel Hey you woldnt happen to know if there is a way to make it where the superconsole 1000 rings (when a trunk rings) and all other phones ring at the same time that you know of. (Other phones are: 1 4150, 1 4025, and a bunch of 4015's) I couldn't figure this out but in my personal opinion the customer is asking too much
|
|
|
|
Joined: Jul 2006
Posts: 202
Member
|
OP
Member
Joined: Jul 2006
Posts: 202 |
Yep, Its an office and they are lazy because the receptionist just left their company so now they have calls ringing every phone in the office and they are too lazy to answer the phone because they think the recep. is going to get it. LOL Thanks, Daniel Hey you woldnt happen to know if there is a way to make it where the superconsole 1000 rings (when a trunk rings) and all other phones ring at the same time that you know of. (Other phones are: 1 4150, 1 4025, and a bunch of 4015's) I couldn't figure this out but in my personal opinion the customer is asking too much
|
|
|
|
Joined: Oct 2004
Posts: 1,057
Member
|
Member
Joined: Oct 2004
Posts: 1,057 |
Only the 4150's (sub-attendant) can be programmed with LDN keys, so it will ring simultaneously with the console.
|
|
|
|
Joined: Aug 2006
Posts: 1,136
Member
|
Member
Joined: Aug 2006
Posts: 1,136 |
About the only way you can do this is to set a night 1 answer point ext and program it on a button on all the sets and then set up "Attendant no answer automatic call forward" and then set the timer for a very short interval - that way if the attendat doesn't get it then it will autmatically start ringing on the night 1 answer point on all the other phones - only drawback is once it starts ringing the other phones the console can't answer it. Other option is to have the calls ring to a night bell and give the console the ability to answer it and the other phones could dial a code to answer the call.
|
|
|
Forums84
Topics94,306
Posts638,894
Members49,771
|
Most Online5,661 May 23rd, 2018
|
|
1 members (phonman123),
55
guests, and
31
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|