web statisticsweb stats

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
Joined: Jul 2008
Posts: 3
Member
Member
Offline
Joined: Jul 2008
Posts: 3
Hey all, just picked up an LCD console, but have discovered that it may not work on SX-200 ICP.

What i don't know is "what won't work". For the most part, i just want to be able to do call forwards.

It don't have to act like a Superconsole or take calls etc.

My telco bud said that I could hook it up to a digital port and then make it a console.

But I think i want more info.

Thanks!

Jim

Atcom VoIP Phones
VoIP Demo

Best VoIP Phones Canada


Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Joined: Jul 2001
Posts: 1,985
Moderator-Mitel, NEC, Vodavi
*****
Moderator-Mitel, NEC, Vodavi
*****
Joined: Jul 2001
Posts: 1,985
It ran off of the universal card in a SX-200D. Definately won't run on a ICP.

Joined: Oct 2004
Posts: 1,057
Member
****
Member
****
Offline
Joined: Oct 2004
Posts: 1,057
The LCD console does work on the icp's. You just need a universal card and the console module. Good old Mitel makes almost everything reverse compatible!!


www.ResaleSystems.com 24 x 7 Mitel Parts and Free Tech Support
Joined: Jul 2008
Posts: 3
Member
Member
Offline
Joined: Jul 2008
Posts: 3
Heh, ok now I'm more confused, one says yes, one says no.

You can see my kanundrum smile

Jim

Joined: Oct 2004
Posts: 1,057
Member
****
Member
****
Offline
Joined: Oct 2004
Posts: 1,057
Does this help??

Unless otherwise noted, the following products and peripheral devices are not supported by the SX-200 ICP and are not described in this infobase:
• SUPERSET 3 and SUPERSET 4 telephones
• SUPERSET 4 telephones for voice mail
• Modem Interconnect Panel
• DATASET 1102 Rack-mounted Dataset
• DATASET 2102 Rack-mounted Dataset
• DATACABINET 9000 data cabinet
• DATASHELF 9100 datashelf
• LCD Console (and Console module for Universal Card) are supported but are not described in this infobase.
• SPINE Bays
• SX-200 IP Node
• SMART-1 Device
• MITEL MyAttendant
• DATASET 1101 data cartridge
• Mitel 5424 IrDA Module
• Mitel TAPI Desktop Software
• SUPERSET DSS module (supported by the SX-200 ICP MX controller only)
• SUPERSET 4090 (supported by the SX-200 ICP MX controller only)
• Digital Line Monitor (DLM)


www.ResaleSystems.com 24 x 7 Mitel Parts and Free Tech Support
Joined: Jul 2008
Posts: 13
Member
Member
Offline
Joined: Jul 2008
Posts: 13
The old SX200D consoles use 4 conductors to operate and it needs the console module that is plugged into the universal card. The new consoles use Digital card and works on 1 pair only. If you have a console that only requires 1 pair then it will work on SX200ICP. I hope this helps.

Joined: Jul 2008
Posts: 3
Member
Member
Offline
Joined: Jul 2008
Posts: 3
Hi Joe, thanks for your input, I'm not sure how to tell if this LCD console i have needs the 2 or 4 wire configuration.

I spoke with someone local he agreed with what you said and also said if it does not work, it should not blow anything up.

If this is of value to you tho, here are the part numbers:

LCD CONSOLE 9108-007001-NA REV A.1
Power Input 48V/35mA

it does have 4 leads on the line jack, but they may not all be in use.

I more maintain this system then do major stuff with it. Before i give it a digital circuit, what should i set the "set type" too?

And I guess I'll need to do something in form 7?

As mentioned, i don't want this to act as a reception console, just for me to do the call forwards etc.

Thanks!!

Jim

Joined: Feb 2007
Posts: 2,473
Member
Member
Offline
Joined: Feb 2007
Posts: 2,473
Hey Jim. Go to form 7 and take a look what position is your Console at (Bay, Slot, Circuit). If it's Digital card then one pair, if Universal card-two pair. Easy.

Joined: Oct 2004
Posts: 1,057
Member
****
Member
****
Offline
Joined: Oct 2004
Posts: 1,057
The 'LCD Console'(9108-007-00?)operates on a 2 pair configuration. It needs to be connected to a 'console module' that rides on a universal card. The universal card need to be installed into a peripheral node. The peripheral node needs to be attached to the icp controller.
The console gets programmed in form #7 by assigning it an extension number, and a class of service.
It's worked that way since the mid 80s, (SX200 Digital)and continues to work the same way today (SX200icp).


www.ResaleSystems.com 24 x 7 Mitel Parts and Free Tech Support
Joined: Sep 2006
Posts: 372
Member
Member
Joined: Sep 2006
Posts: 372
Program the following:
System Configuration
Console Assignment
Console LDN Assignment

You can click on “Equipment” at the top of this page, the Mitel link will bring up Mitel SX200 Digital cards. You need the Console DLIC Module and a Universal card. You will also need to cross connect the 2 pair and wire it to a jack.


JimmyV

"Well informed people know it is impossible to transmit the voice over wires. Even if it were, it would be of no practical value" Boston Post, 1865

Link Copied to Clipboard
Newest Topics
Answer ringing line without pressing a button
by Pinnacle Rich - 06/02/25 10:53 AM
IT Guy. Jersey City, NJ
by hitechcomm - 05/29/25 10:09 PM
Nortel Venture phone question
by empire - 05/26/25 04:27 PM
Vertical door phone
by newtecky - 05/23/25 07:15 PM
Forum Statistics
Forums84
Topics94,543
Posts640,074
Members49,857
Most Online5,661
May 23rd, 2018
Newest Members
telli, CCTechProf, Pinnacle Rich, chris c755555, empire
49,857 Registered Users
Top Posters(30 Days)
Toner 6
hbiss 2
Who's Online Now
0 members (), 159 guests, and 36 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998 - 2025
Powered by UBB.threads™ PHP Forum Software 8.0.0