|
|
Joined: Aug 2009
Posts: 3
Member
|
|
Member
Joined: Aug 2009
Posts: 3 |
I was wandering if anyone can give me some information on the sx200. By this I mean, how is it programmed (laptop, special software, etc). The company that was working on this has been asked not to come out anymore. I have been in the telcom business for 21 years and know the Avaya switches pretty well. Any help would be great
Thanks in advance
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Feb 2007
Posts: 2,473
Member
|
|
Member
Joined: Feb 2007
Posts: 2,473 |
If it Analog SX-200(Gen.16 or 17) then all programming done through Console. If it Digital or ICP you need to use Hyper terminal, VT 100 Compatible. No tel set programming is available.
|
|
|
|
|
Joined: Dec 2005
Posts: 7,056
RIP Moderator-Mitel, Panasonic
|
|
RIP Moderator-Mitel, Panasonic
Joined: Dec 2005
Posts: 7,056 |
Digital and ICP can be programmed with a computer or terminal. OR through the console but it's tedious. Analog can only be programmed through Console. You can backup and restore analog, according to the practices, but I've never been successful. You can also print out the analog program to paper or HYPERterm from analog. You can print out digital or EL program although it's tedious. You cannot save and restore digital, proprietary OS,  . You CAN backup and restore EL, and later, easily. Now that you have too much info, did you get what you needed? John C.
When I was young, I was Liberal. As I aged and wised up, I became Conservative. Now that I'm old, I have settled on Curmudgeon.
|
|
|
|
|
Joined: Aug 2009
Posts: 3
Member
|
|
Member
Joined: Aug 2009
Posts: 3 |
Roughly I would say that their is 25 ip sets and approximately 150-175 analog phones. they have 3 of the 3 asu connected to the main unit. I need to be able to either have someone get into this or walk me into getting into it so we can see the capacity of this Mitel. I will be on site in the pm Tomorrow 8/21/09
|
|
|
|
|
Joined: Dec 2005
Posts: 7,056
RIP Moderator-Mitel, Panasonic
|
|
RIP Moderator-Mitel, Panasonic
Joined: Dec 2005
Posts: 7,056 |
"The company that was working on this has been asked not to come out anymore. "
You may want to investigate a little further, before committing. John C.
When I was young, I was Liberal. As I aged and wised up, I became Conservative. Now that I'm old, I have settled on Curmudgeon.
|
|
|
|
|
Joined: Nov 2004
Posts: 290
Member
|
|
Member
Joined: Nov 2004
Posts: 290 |
"The company that was working on this has been asked not to come out anymore. "
most likey the passwords have been changed & only
they or Mitel(for a hefty fee)can change it.
Good luck.
|
|
|
|
|
Joined: Jun 2008
Posts: 6
Member
|
|
Member
Joined: Jun 2008
Posts: 6 |
i am trying to locate specs on the sx200 mm fiber. i am trying to select a good mm to sl fiber convertor. any suggestions?
|
|
|
|
|
Joined: Sep 2006
Posts: 372
Member
|
|
Member
Joined: Sep 2006
Posts: 372 |
You need to start your own thread and let us know what you what you are trying to accomplish. MM to sl fiber converter… what does the sl stand for?
JimmyV
"Well informed people know it is impossible to transmit the voice over wires. Even if it were, it would be of no practical value" Boston Post, 1865
|
|
|
|
|
Joined: Jun 2008
Posts: 6
Member
|
|
Member
Joined: Jun 2008
Posts: 6 |
Sorry, multi mode to single mode convertor. The location where I need to install a remote peripheral node only has single mode fiber serviceing it.
|
|
|
|
|
Joined: Sep 2006
Posts: 372
Member
|
|
Member
Joined: Sep 2006
Posts: 372 |
Are you using a Fim, FIM II or a triple Fim, Mitel has SM versions of each. You will need 2, one on each side.
FIM SM 9400-300-316-NA
FIM II SM 9180-510-003-NA
Control Triple FIM SM 9109-613-003-NA
JimmyV
"Well informed people know it is impossible to transmit the voice over wires. Even if it were, it would be of no practical value" Boston Post, 1865
|
|
|
|
Forums84
Topics94,518
Posts639,984
Members49,850
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (Carl Navarro),
141
guests, and
47
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
