|
|
|
|
Joined: Mar 2007
Posts: 54
Member
|
|
Member
Joined: Mar 2007
Posts: 54 |
Hey guys, new one on me. Got an AX controller. T1/E1 module in MMC 1. Programmed T1 Trunk Card for slots 1 and 2 (per folio instructions). All i can see from there is to program your T1 like normal right? However for slots 2 and 4 they show under programmed and installed. As soon as i assign a link descriptor number to slot 2, the t1 trunk card disappears from the installed section of form 1. You have to remove link descriptor assignment, reboot, and then it will show under installed again in form 1.
All the settings that are set in the link descriptor are fine. i dont understand what the headache is, however this is my first AX controller experience and maybe something goofy Mitel neglected to share on documentation..
Any ideas!?
Oh and running software version - 5.0.0.18
Thanks
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Mar 2007
Posts: 54
Member
|
|
Member
Joined: Mar 2007
Posts: 54 |
Forgot to add, it only disappears for slot 2 under installed, slot 4 does show the t1 trunk card under installed, however assigning a link descriptor to slot 4 as well makes it disappear.
|
|
|
|
|
Joined: Apr 2009
Posts: 89
Member
|
|
Member
Joined: Apr 2009
Posts: 89 |
We've never done an AX either...
How many digital links are in form 4?
Dave
Manager of technical services
Mitel/Toshiba dealer for 25 years
TAG member
|
|
|
|
|
Joined: Mar 2007
Posts: 54
Member
|
|
Member
Joined: Mar 2007
Posts: 54 |
Turned out to be a bad t1/e1 module....never seen one do that, chalk that up for experience! I did look at form 4 too it had 1 link as it should. Everything is working fine.
|
|
|
|
|
Joined: Apr 2002
Posts: 144
Member
|
|
Member
Joined: Apr 2002
Posts: 144 |
I'm doing an AX database now. I only have one T1 to be installed, so I only program 1 T1 (bay3, slot2). I was under the impression that with only 1 link in form 4, you could only program 1 T1 slot at a time. ?? However, I programmed slot 4 as a T1, but nothing shows under installed for that slot. I like my method: 1 T1 link, only program 1 T1.
If it ain't broke, don't fix it!
|
|
|
|
|
Joined: Mar 2007
Posts: 54
Member
|
|
Member
Joined: Mar 2007
Posts: 54 |
According to the documentation you are to program both slot 2 and 4. However we programmed like normal and it is working fine. Program your slot 2 and everything else like you normally would and you should be fine. I agree with you, i try to never program anything not being used!
|
|
|
|
Forums84
Topics94,518
Posts639,976
Members49,850
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (BobRobert),
292
guests, and
47
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
