|
|
Joined: May 2005
Posts: 526
Member
|
OP
Member
Joined: May 2005
Posts: 526 |
I have little experience with the Mitel (Inter-Tel guy) I have a new install going in next week and worked on programming it today. I have 2 LS/GS cards installed in 2.7.X and 2.8.X. Two things I’m not seeing where do I tell them they are Ground start? And What do I use as the COS? I have some great programming info I got from Dane before he passed away but don’t see a COS he had setup for GS trunks in the stuff he sent me.
Thanks in advance for any help!!
Randy
|
|
|
|
|
Joined: Nov 2006
Posts: 196
Member
|
|
Member
Joined: Nov 2006
Posts: 196 |
I don't recall anything that has to be changed in CDE for GS trunks. Keep in mind that the embedded trunks on the ICP controller are only loop start. GS trunks have to come in on a trunk card in a peripheral cabinet. You'll see a jumper for each of the trunk circuits on the LS/GS card... just move that jumper to 'G'. And double check your polarity.
I usually set GS trunks in a separate COS and Trunk Descriptor but that's just in case I have to make changes to handle anything the LEC does differently with GS.
Harry at Telecom Equipment & Consulting Specializing in Mitel systems for the Hotel/Motel industry www.TECHarry.com
|
|
|
|
|
Joined: Oct 2004
Posts: 1,057
Member
|
|
Member
Joined: Oct 2004
Posts: 1,057 |
The 6 cct LS/GS cards have GS straps on them. The white marking on the shorting pins should be closest to the 'G' or 'L' etched on the card.
There is no software option, only the straps on the card.
|
|
|
|
|
Joined: May 2005
Posts: 526
Member
|
|
OP
Member
Joined: May 2005
Posts: 526 |
|
|
|
|
Forums84
Topics93,877
Posts636,993
Members49,670
| |
Most Online5,661
May 23rd, 2018
|
|
|
2 members (Skunky, pvj),
145
guests, and
19
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
