|
|
Joined: Feb 2008
Posts: 63
Member
|
|
Member
Joined: Feb 2008
Posts: 63 |
A customer has an SX-50 and several times a day incoming calls start ringing to rooms 229 0r 231 with console in day service. They never use night service but I checked and it is set to 100 on all trunks in night. All programming looks good, no recent changes. Reseting system fixes problem for a few hours. I really hate to have to default and reprogram this thing but it looks like I am heading that way. Anyone have any other ideas?
MS-55 software. Battery replaced 6 months ago.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jul 2001
Posts: 1,985
Moderator-Mitel, NEC, Vodavi
|
|
Moderator-Mitel, NEC, Vodavi
Joined: Jul 2001
Posts: 1,985 |
Have you checked the attendant overflow setting?
|
|
|
|
|
Joined: Dec 2005
Posts: 7,056
RIP Moderator-Mitel, Panasonic
|
|
RIP Moderator-Mitel, Panasonic
Joined: Dec 2005
Posts: 7,056 |
Does 100 have forward on busy set? Oh, and is 100 possibly a hunt group, rather than an extension? And last but not least, are ALL trunks set to the console in day? + what the Doctor said.
When I was young, I was Liberal. As I aged and wised up, I became Conservative. Now that I'm old, I have settled on Curmudgeon.
|
|
|
|
|
Joined: Feb 2008
Posts: 63
Member
|
|
Member
Joined: Feb 2008
Posts: 63 |
Problem solved! Overflow was to 100,which was a hunt group. One of the phones in the hunt group was call fowarded to 229 and another was fowarded to 231. And as usual no one has any clue to how this happened.
Thanks everyone!
|
|
|
|
|
Joined: Dec 2005
Posts: 7,056
RIP Moderator-Mitel, Panasonic
|
|
RIP Moderator-Mitel, Panasonic
Joined: Dec 2005
Posts: 7,056 |
The Hospitality business never ceases to amaze me!
Suggestions:
1. Overflow to the RING GROUP.
2. Deny all call forwarding on ring group (or hunt group) members.
3. Change programmer security code, and deny customer programming. Also, realize that unless you disable it, all you have to do is dial the access code in the basic program to go into programming. Default is XX. To disable, Control Card Status switch Y must be set to 'ZZZZ'. PM me and I'll fill in the blanks. Or see CDE instructions. John C.
When I was young, I was Liberal. As I aged and wised up, I became Conservative. Now that I'm old, I have settled on Curmudgeon.
|
|
|
|
Forums84
Topics94,524
Posts640,007
Members49,851
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (justbill),
203
guests, and
38
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
