|
|
|
|
Joined: May 2010
Posts: 2
Member
|
|
Member
Joined: May 2010
Posts: 2 |
The trunk card has all the lights lit and the alarm is constantly ringing like when you start the system up after turning it off.
The console shows nothing.
Is my problem the Trunk card ,the software card or something else?
This has happened once before and just restarting the system fixed it but this time no luck.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Oct 2004
Posts: 1,057
Member
|
|
Member
Joined: Oct 2004
Posts: 1,057 |
Disconnect the cable on the front of the card, and see if the lights go out. If yes, you've got trunk problems, if no, it's a system problem!
If it's a system problem, reconnect the cable. Dial *32 then release, from the console to clear all busy out conditions.
|
|
|
|
|
Joined: Dec 2005
Posts: 7,056
RIP Moderator-Mitel, Panasonic
|
|
RIP Moderator-Mitel, Panasonic
Joined: Dec 2005
Posts: 7,056 |
Does anything else work? Can extensions call each other? If the answer are both NO, you've probably lost most or all of the programming. Did you have a power outage of more than a minute or so? If so, you ooolllddd memory support battery probably failed!  That means your programming is trash and you are going to need knowledgeable help to confirm, initialize, and reprogram. AND CHANGE THAT BATTERY FIRST!
When I was young, I was Liberal. As I aged and wised up, I became Conservative. Now that I'm old, I have settled on Curmudgeon.
|
|
|
|
Forums84
Topics94,518
Posts639,974
Members49,849
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
245
guests, and
60
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
