|
|
|
|
Joined: Jan 2002
Posts: 47
Member
|
|
Member
Joined: Jan 2002
Posts: 47 |
Does anyone have any experiance faxing over frame relay using ADTRAN 550 and Express 5210. I have them configured and I get 1 out of 10 to go thuru. Any Ideas or assistance would be appreciated.
TIA
Don
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Apr 2002
Posts: 646
Member
|
|
Member
Joined: Apr 2002
Posts: 646 |
Most of the time faxing issues are caused by clocking. Make sure one end is internal(550) and the other is loop or NET.
|
|
|
|
|
Joined: Jan 2002
Posts: 47
Member
|
|
Member
Joined: Jan 2002
Posts: 47 |
The primary clocking on the 550 is T1/PRI
and the DTE port on the 5210 is disabled are you saying I should change this config. I have spent several hours on the phone with ADTRAN and they have not mentioned clocking at all.
Don
|
|
|
|
|
Joined: Apr 2002
Posts: 140
Member
|
|
Member
Joined: Apr 2002
Posts: 140 |
adtran is not the fastest at catching on to a problem. they have some good products and good support, but every now and then it takes a few hours for it to click.
|
|
|
|
|
Joined: Mar 2002
Posts: 3,630
Moderator-Avaya, Nortel
|
|
Moderator-Avaya, Nortel
Joined: Mar 2002
Posts: 3,630 |
If I got advice from Gkar and advice from the manufactor, I would do what Gkar says. He's not one to screw the pooch very often!
|
|
|
|
Forums84
Topics94,551
Posts640,098
Members49,861
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (Toner),
224
guests, and
21
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
