|
|
Joined: May 2011
Posts: 10
Member
|
OP
Member
Joined: May 2011
Posts: 10 |
Hi everyone.
I have not much knowledge about Phone System, i have SX200 LW17 H24.0.0 in my hotel.
And once in week, outgoing call stop working, when we try from cosole or any room, ahile dialing number, we hear busy signal. last time i turn off system and turn back on , it started working fine, this time i tried same did not work, then i remove Digital card(i think blue color card) and its started working. i know more people are in this forum are very knowledgable persons, can anybody tell me whats might be wrong?
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: May 2007
Posts: 218
Member
|
|
Member
Joined: May 2007
Posts: 218 |
Something is causing lock ups.
Resetting the system or cards is not fixing anything, and can lead to more problems.
You will need an experienced Mitel technician to diagnose and repair the problem.
I am sure you can find one in your area from this site.
Good Luck!
Located in Southern California.
Mitel, Avaya, Nortel and Hitachi Products and services for Hospitality and Business sectors. Tel: 1-800-329-7971
|
|
|
|
|
Joined: Aug 2005
Posts: 2,125
Member
|
|
Member
Joined: Aug 2005
Posts: 2,125 |
Agreed. A technician needs to read the alarms and the logs to see what component is failing. You might be able to get a clue from the display on the console, but in general you need a tech.
|
|
|
|
|
Joined: May 2011
Posts: 10
Member
|
|
OP
Member
Joined: May 2011
Posts: 10 |
Thanks telephoneguy & mr tech. In console it's showing major alarm. I think it was not there before .
|
|
|
|
|
Joined: Feb 2006
Posts: 1,716
Member
|
|
Member
Joined: Feb 2006
Posts: 1,716 |
One reason you have a major alarm is that you removed one of the modules. Depending on how the alarm thresholds were set, that will trigger a major or minor alarm.
Removing modules without knowing what you are doing can cause major damage to the system or could lead to a total system failure. For you own sake, call a Mitel technician.
Rcaman
Americom, Inc.
Where The Art And Science Of Communications Meet
|
|
|
|
|
Joined: Apr 2007
Posts: 339
Member
|
|
Member
Joined: Apr 2007
Posts: 339 |
do you have option 702 enabled in your class of service for all devices?
|
|
|
|
|
Joined: Jul 2003
Posts: 1,132
Member
|
|
Member
Joined: Jul 2003
Posts: 1,132 |
I was thinking the smdr buffer being filled was his first problem
|
|
|
|
|
Joined: May 2011
Posts: 10
Member
|
|
OP
Member
Joined: May 2011
Posts: 10 |
Thanks everybody for your help. It happen again today , i followed the manual and read all Alarm. Then I remove ONS card and put it back and it started workign fine. now everything is working good. There is ALARM red light blinking on MCC III-EL card and also on LS/GS trunk (6CCT) card. I hope i dont have to call technician now. please let me know any suggestion.
|
|
|
|
|
Joined: May 2011
Posts: 10
Member
|
|
OP
Member
Joined: May 2011
Posts: 10 |
|
|
|
|
|
Joined: Dec 2005
Posts: 7,056
RIP Moderator-Mitel, Panasonic
|
|
RIP Moderator-Mitel, Panasonic
Joined: Dec 2005
Posts: 7,056 |
JAY2002, ALL YOU ARE DOING IS PUTTING OFF THE INEVITABLE. Time to call a qualified technician. Tell him to have a spare ONS card and a spare LS/GS card with him.
When I was young, I was Liberal. As I aged and wised up, I became Conservative. Now that I'm old, I have settled on Curmudgeon.
|
|
|
|
Forums84
Topics94,282
Posts638,762
Members49,764
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
62
guests, and
129
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
