|
|
|
|
Joined: Jun 2005
Posts: 204
Member
|
|
Member
Joined: Jun 2005
Posts: 204 |
I'm having another problem with this boat anchor.
Intermittently, when users dial a phone number with a 1 in it the call will not go through properly. For some reason the system stops sending any 1's to the phone company. Power off/on resolves the issue for a short time (a day, or 5 minutes).
I'm guessing it's a sticky relay, but I don't know where or how to resolve the problem.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Sep 2004
Posts: 4,220 Likes: 2
Member
|
|
Member
Joined: Sep 2004
Posts: 4,220 Likes: 2 |
Sounds to me like a bad DTMF port. I don't know the Onyx that well but in other systems that was a pretty good starting point.
|
|
|
|
|
Joined: Jun 2005
Posts: 204
Member
|
|
Member
Joined: Jun 2005
Posts: 204 |
Anyone know what board I need to replace to fix a bad DTMF port?
Thanks
|
|
|
|
|
Joined: Sep 2003
Posts: 70
Member
|
|
Member
Joined: Sep 2003
Posts: 70 |
Its either a trunk protect card or the 4 port co card that will need to be changed. The trunk or trunks causing the problem must be isolated first. Check programming to find which trunk is first to dial out through the loop keys or ARS or however they are dialing.
|
|
|
|
Forums84
Topics94,512
Posts639,933
Members49,844
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
135
guests, and
38
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
