|
|
Joined: Mar 2007
Posts: 71
Member
|
OP
Member
Joined: Mar 2007
Posts: 71 |
Pardon my ignorance, but can someone answer a few questions for me?
I am replacing a Nitsuko DTS system, with two modules - one is a 4 CO Line with RJ inputs, and a "12 SCU" module with amphenol connector. My question is, what gender is the amphenol connector of the unit, and what type of station connector is required (2 wire or 4 wire)? Also, is this a digital or an analog system?
Any advise or help would be appreciated.
Yes, I am retired - so why am I still working on phones?
|
|
|
|
|
Joined: Mar 2007
Posts: 71
Member
|
|
OP
Member
Joined: Mar 2007
Posts: 71 |
No one knows? Analog or digital?
Yes, I am retired - so why am I still working on phones?
|
|
|
|
|
Joined: Jan 2004
Posts: 6,648
RIP Moderator-Nisuko-Tie, General
|
|
RIP Moderator-Nisuko-Tie, General
Joined: Jan 2004
Posts: 6,648 |
well , DTS =(digital telephone system )
From your description I suspect its a DS01 or Onyx , either one requires two pair for stations
I don't recall the gender of the AMP
Skip
------------------------------------
Serving SW and West central Fl since 1984
|
|
|
|
|
Joined: Mar 2006
Posts: 193
Member
|
|
Member
Joined: Mar 2006
Posts: 193 |
You will need a female amphenol as the connector on the 12SCU card is male.
Each station requires 2 pairs (4 wires), as far as I know it is a digital system.
I hope that helps.
Chris
|
|
|
|
Forums84
Topics93,628
Posts635,876
Members49,589
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (bdunne),
139
guests, and
28
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
