web statisticsweb stats Business Phone Systems Tech Talk Forum - VOIP & Cloud Phone Help

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
Page 1 of 2 1 2
#119045 03/23/01 02:15 PM
Joined: Mar 2001
Posts: 7,350
dtmf Offline OP
RIP Admin
*****
OP Offline
RIP Admin
*****
Joined: Mar 2001
Posts: 7,350
An 824 was replaced with a 0x32,The startalk VM had 2DN assigned from old 824,In order to set the VM to work on 3DN numbers we had to reboot it.Well now all access features are inactive features.Yet you can dial the Vm port and get voice mail.Nortel say's that the ver. of the System and VM are compatible.
O ya it's a 2port 4channel VM.
As you can see I'm not a moderator for Nortel so all you Nortel Tech's can help out the Lucent man [Linked Image from sundance-communications.com]

[This message has been edited by dtmf (edited 03-23-2001).]


Russ runs a local service and private tech center.

[Linked Image from sundance-communications.com][/url]
Nortel Phone System Service
VoIP Demo

Nortel Phone System Service in Canada


Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.

#119046 03/23/01 03:26 PM
Joined: Mar 2001
Posts: 8
Member
Offline
Member
Joined: Mar 2001
Posts: 8
so what is your ?

#119047 03/23/01 04:01 PM
Joined: Mar 2001
Posts: 7,350
dtmf Offline OP
RIP Admin
*****
OP Offline
RIP Admin
*****
Joined: Mar 2001
Posts: 7,350
The problem is that you cant get in to the voice mail to do any admin. programming.Feature 983 comes up as inactive feature so thats as far as you can go with it.

[This message has been edited by dtmf (edited 03-23-2001).]


Russ runs a local service and private tech center.

[Linked Image from sundance-communications.com][/url]
#119048 03/23/01 05:32 PM
Joined: Jul 2001
Posts: 1,985
Moderator-Mitel, NEC, Vodavi
*****
Offline
Moderator-Mitel, NEC, Vodavi
*****
Joined: Jul 2001
Posts: 1,985
You could try connecting via any terminal program (hyperterm, pc anywhere) to the serial port of the startalk, there are some admin features there I think.

#119049 03/24/01 08:11 AM
Joined: Mar 2001
Posts: 577
Member
Offline
Member
Joined: Mar 2001
Posts: 577
do a feature 9*1,this will show you your feature codes,press next until you have went through whole list.this will verify your codes.newer software has an upper and lower range.


In Memory of Moderator Bruce Owen who pass away Jan 20 2004.
http://www.owentel.com
#119050 03/24/01 08:49 AM
Joined: Mar 2001
Posts: 7,350
dtmf Offline OP
RIP Admin
*****
OP Offline
RIP Admin
*****
Joined: Mar 2001
Posts: 7,350
I've tried 9*1 and it also comes up as inactive feature.Ay feature code that deals with the VM is inactive feature since we gave it a reboot.By all normal thinking it should have come up with all features in default.It act's like the system is not reading that it's there but port programming say's that it is.We've powered down the system to see if it would see it upon restart. Nothing works (THINK REAL HARD GUY'S)has any one of you had this problem before or am I just lucky.
[Linked Image from sundance-communications.com]



[This message has been edited by dtmf (edited 03-24-2001).]


Russ runs a local service and private tech center.

[Linked Image from sundance-communications.com][/url]
#119051 03/24/01 10:46 AM
Joined: Mar 2001
Posts: 577
Member
Offline
Member
Joined: Mar 2001
Posts: 577
it certainly sounds like you have non-compatible software,nortel has been known to give out erroneous info.what type and how old is the VM?


In Memory of Moderator Bruce Owen who pass away Jan 20 2004.
http://www.owentel.com
#119052 03/24/01 12:39 PM
Joined: Mar 2001
Posts: 19
Member
Offline
Member
Joined: Mar 2001
Posts: 19
sounds to me that you are trying to upgrade the KSU without upgrading the VM. It is my understanding that when upgrading a KSU you must also upgraded VM as well and when doing this you need to upgrade the VM first then the KSU.For example: if you have a KSU and a VM that are v.3.0 and you upgrade to v.4.1 on KSU it will not talk to the VM, however if you upgrade the VM. only to v.4.1 and leave the KSU at v 3.0 the VM will still talk to the KSU.

#119053 03/24/01 12:44 PM
Joined: Mar 2001
Posts: 7,350
dtmf Offline OP
RIP Admin
*****
OP Offline
RIP Admin
*****
Joined: Mar 2001
Posts: 7,350
VM was used when the 824 went in about 2yrs ago its a startalk I believe mini (2port 4chanel)the ver. is 4.1 , Im with you openwire,we have done everything we can but update. I'm just going to have to get with Nortel and chew some butt until they come up with what I want to hear.You have been a big help and if I can ever repay you guys just ask.
dtmf


Russ runs a local service and private tech center.

[Linked Image from sundance-communications.com][/url]
#119054 03/25/01 08:36 AM
Joined: Jun 2001
Posts: 10,631
RIP Admin-Founder
*****
Offline
RIP Admin-Founder
*****
Joined: Jun 2001
Posts: 10,631
>chew some butt until they come up with what I want to hear<

I wouldn't suggest that. [Linked Image from sundance-communications.com]


[This message has been edited by test-ok (edited 03-25-2001).]

Page 1 of 2 1 2

Moderated by  MooreTel 

Link Copied to Clipboard
Forum Statistics
Forums84
Topics94,262
Posts638,696
Members49,757
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
211,098 Shoretel
187,707 CTX100 install
186,794 1a2 system
Newest Members
BPopilek, Rich F, LewisR, TDKs79, Buttinset
49,757 Registered Users
Top Posters(30 Days)
dexman 18
Toner 14
TDKs79 8
teleco 4
Who's Online Now
1 members (Toner), 122 guests, and 242 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998-2024
Powered by UBB.threads™ PHP Forum Software 7.7.5