|
|
|
|
Joined: Nov 2001
Posts: 12
Member
|
|
Member
Joined: Nov 2001
Posts: 12 |
I have a few Norstar MICS (Commander NT)software cartridges on my test bench that will not initialise. When I power-up with one of these installed, I hear relays in the KSU click about every 10 seconds but the Terminal LCDs flash indefinitely.
Does anyone know of a process to reset the cartridges?....or should I throw them away.
Any suggestions would be appreciated.
Mick Brett
Brisbane
AUSTRALIA
Wombat Computers & Communications
Brisbane
AUSTRALIA
Ph 61 411 444 688
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: Apr 2002
Posts: 305
Member
|
|
Member
Joined: Apr 2002
Posts: 305 |
If the system was already working with a higher s/w version you can't power up with a lower version it will keep flashing.IF you sure that you have a good KSU and S/w and I sugest to you to open The KSU and short the Battery for about a minuet and then try to load up the new s/w it should work then with default settings.
Good luck
|
|
|
|
|
Joined: Nov 2001
Posts: 12
Member
|
|
Member
Joined: Nov 2001
Posts: 12 |
That worked fine. All cartridges now test OK. Thanks for the tip samh.
Wombat Computers & Communications
Brisbane
AUSTRALIA
Ph 61 411 444 688
|
|
|
|
Forums84
Topics94,530
Posts640,032
Members49,852
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (BitSmith),
150
guests, and
69
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
