|
|
|
|
Joined: May 2003
Posts: 50
Member
|
|
Member
Joined: May 2003
Posts: 50 |
Question: Why does the BCM/Norstar affix the area code on caller id info to the end of the number. When the call comes in your are shown a 10 digit number area code first. However when you view the call log you see a seven digit number followed by the area code. Simply selecting an outgoing line should place a return call, but it dials the seven digit number followed by the area code which doesn't work for ten digit dialing. Why is this? Is there a fix?
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: Apr 2002
Posts: 157
Member
|
|
Member
Joined: Apr 2002
Posts: 157 |
CI info gives you the opportunity to add or "trim" numbers. if you add the area code it will dial out the number when you select the line. Guess they never changed it because some areas still use 7 digit dialing.
|
|
|
|
Forums84
Topics94,526
Posts640,017
Members49,852
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
346
guests, and
59
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
