|
|
Joined: Apr 2004
Posts: 33
Member
|
OP
Member
Joined: Apr 2004
Posts: 33 |
I am looking for a telephone system that will take a digital rj48 type of connection from a F-T1 csu/dsc for 8 voice channels. I am looking at an Avaya Partner ACS , but my understanding is that the ACS will not take a digital handoff (rj48x), that it needs to be copper/analog handoffs. Will Norstar support a t1 card? tks...
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: Aug 2003
Posts: 5,154 Likes: 2
Moderator-Vertical, Vodavi
|
|
Moderator-Vertical, Vodavi
Joined: Aug 2003
Posts: 5,154 Likes: 2 |
Yes, the Norstar will handle a T1 or a PRI with no problems.
|
|
|
|
|
Joined: May 2003
Posts: 50
Member
|
|
Member
Joined: May 2003
Posts: 50 |
The Partner rls 6 will give you a T1 interface. This is a new item and you will have to use a computer to program the T1. Good Luck.
|
|
|
|
|
Joined: Jul 2004
Posts: 7
Member
|
|
Member
Joined: Jul 2004
Posts: 7 |
It is my understanding that if you want ANI (like caller ID on a T-1)/DNIS, you need a PRI T-1. Not sure what you do, but my experience as an end user is that you will need to keep pressure on everyone involved to ensure that T-1 provisioning is properly matched to equipment and needs.
|
|
|
|
|
Joined: Jul 2004
Posts: 7
Member
|
|
Member
Joined: Jul 2004
Posts: 7 |
Ooops! I was not specific enough - this would be for a Nortel Norstar (not sure if software beyond version 4.0 still needs PRI T-1)
|
|
|
|
Forums84
Topics94,284
Posts638,771
Members49,765
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (Toner),
164
guests, and
391
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
