|
|
|
|
Joined: Oct 2004
Posts: 2
Member
|
OP
Member
Joined: Oct 2004
Posts: 2 |
I'm new to norstar. I've got a Norstar Compact Plus system (analogue) and a BT line and a Telewest Line which I would like to connect to it.
I believe I have connected the lines to the correct terminals, but I always get "no dial tone".
Any hints would be much appreciated.
Thanks a lot.
Eric
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: Apr 2002
Posts: 1,101
Member
|
|
Member
Joined: Apr 2002
Posts: 1,101 |
Which line are you trying to add? 1, 2, 3, or 4.
Is your software restricted or expanded?
If all else fails, use a BFH.
|
|
|
|
|
Joined: Oct 2004
Posts: 2
Member
|
|
OP
Member
Joined: Oct 2004
Posts: 2 |
I'm trying to add the first line.
How do I tell if it's restricted or expanded?
There is only the basic module in the CICS, slot 2 is empty, the third slot (smaller one) has a blanking plate.
Thanks for your help.
Eric
|
|
|
|
Forums84
Topics94,288
Posts638,794
Members49,767
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
115
guests, and
403
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
