|
|
|
|
Joined: Nov 2004
Posts: 9
Member
|
|
Member
Joined: Nov 2004
Posts: 9 |
I am wondering if anyone knows if you can network Norstar MICS and a Siemens Hicom 300E. The 300E will be the main switch of course. I want to connect them using a point to point T1. I know that DID's will route to the norstar and work fine on incoming calls. I do not know if the norstar user can use the outgoing PRI's in the 300E. All outgoing calls would need to go through the 300E. It is QSIG.
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: Nov 2004
Posts: 1
Member
|
|
Member
Joined: Nov 2004
Posts: 1 |
Use PRI instead between the two switches...should not be a problem and gives you CLID, etc..
|
|
|
|
Forums84
Topics94,551
Posts640,099
Members49,861
| |
Most Online5,661
May 23rd, 2018
|
|
|
2 members (Toner, justbill),
2,136
guests, and
21
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
