web statisticsweb stats Business Phone Systems Tech Talk Forum - VOIP & Cloud Phone Help

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
Joined: Sep 2003
Posts: 39
WTC Offline OP
Member
OP Offline
Member
Joined: Sep 2003
Posts: 39
A customer of mine purchased a C6 module and wants me to install it on his 8 x 24 cabinet. I have not done this before and need to know if the module hooks up on any digital port and if I just parallel the C.O. lines onto the 25 pair. Is there any special programming that needs to be done to activate this and what software does he need to have in the 8 x 24 to make it work.
Thank you in advance for any help you can provide me.

Nortel Phone System Service
VoIP Demo

Nortel Phone System Service in Canada


Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.

Joined: Aug 2004
Posts: 251
Member
Offline
Member
Joined: Aug 2004
Posts: 251
At the risk of sounding stupid (too late I guess) The "C6 Module" doesn't ring a bell. What is it used for?

Joined: Apr 2002
Posts: 157
Member
Offline
Member
Joined: Apr 2002
Posts: 157
The C6 is designed to work with the Norstar Compact DR5 KSU. The M8 is an 8 line model designed for use with the Norstar Modular DR5, Norstar Centrex+.
The CII is connected to the system using bridge-taps on incoming external lines.
Quoted from the installation card.
"1.Using bridge taps, connect the flying- leads of a 25-pair cable to the external lines you wish to recieve call information on. (The bridge taps must be connected on the KSU side of the primary protectors)
2. Connect the line circuits to the appropriate pins in a 25 pair connector using a 25 pair cable of the appropriate length.
3. Plug the 25 pair into the CII
Connect the TCM loop.

Hope this helps.
B

Joined: Nov 2004
Posts: 2
Member
Offline
Member
Joined: Nov 2004
Posts: 2
I also have to install one of the c6 units,
but I heard it doesnt pass the caller id until after you pick up the line? is that correct?

how do I program for call log?

thanks!


Moderated by  MooreTel 

Link Copied to Clipboard
Forum Statistics
Forums84
Topics94,262
Posts638,693
Members49,757
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
211,098 Shoretel
187,703 CTX100 install
186,792 1a2 system
Newest Members
BPopilek, Rich F, LewisR, TDKs79, Buttinset
49,757 Registered Users
Top Posters(30 Days)
dexman 18
Toner 14
TDKs79 8
Who's Online Now
1 members (Curlycord), 77 guests, and 246 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998-2024
Powered by UBB.threads™ PHP Forum Software 7.7.5