|
|
|
|
Joined: Jan 2005
Posts: 1
Member
|
OP
Member
Joined: Jan 2005
Posts: 1 |
I am having a problem getting my call pilot to connect to my CICS plus version 4.1. I have been unable to use the Lan connection, but the serial shows that the TCM isn't connected on 1 or 2. I used the cables provided with the unit. There is only one jack on the cics, so I didn't connect port b. Is this where my problem is?
[This message has been edited by cniels01 (edited January 22, 2005).]
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: Oct 2002
Posts: 279
Member
|
|
Member
Joined: Oct 2002
Posts: 279 |
You should be connecting the CP to a station port of the CICS, not the jack on the KSU. That's what it sounds like you have done.
|
|
|
|
Forums84
Topics94,285
Posts638,782
Members49,766
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (Keyset6),
119
guests, and
172
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
