|
|
|
|
Joined: Jan 2005
Posts: 2
Member
|
OP
Member
Joined: Jan 2005
Posts: 2 |
can any one help me, i got norstar MICS 4.1 with pri opend with key code also equipped with service card nt7b74ga ,( first site)
and i got opt.61c equipped with PRI T1 connection card nt5d12ah ( second site ).
the main isSue is to connect them with PRI.
Each time channels gives me MSBY not IDLE
------------------
sheno
sheno
|
|
|
|
|
Joined: Aug 2004
Posts: 9,131 Likes: 14
Admin
|
|
Admin
Joined: Aug 2004
Posts: 9,131 Likes: 14 |
Check your protocol settings. Also check the 61 route programming to see if it's set to voice calls.
|
|
|
|
|
Joined: Apr 2002
Posts: 305
Member
|
|
Member
Joined: Apr 2002
Posts: 305 |
In order to connect a Norstar MICS with an option system thru PRI (Point to point ) the minimum requirements for the MICS at least release 6.0 and above and it’s required a key code (MCDN) to enable the SL1 protocol. However you can connect them thru T1 with no problem as E&M lines.I hope that helps.
|
|
|
|
Forums84
Topics93,879
Posts637,001
Members49,673
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
65
guests, and
58
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
![[Linked Image]](https://sundance-communications.com/forum/images/559.jpg)