sundance-communications.com Forums Telephony Discussion Phone & VoIP Systems Nortel Telephones & Systems Speed Dial - MCIS 4.1 - C3060

How do i allow a C3060 Phone Speeddial access but no local and long distance?

What filter code would i be using?

Bug

[This message has been edited by bug (edited January 24, 2005).]

Use Link (under feature Request) then * 0to activate Speed Dial.

For restricting Local and Long Distance I suggest you build a new Filter and assign the restricted digits you want and assign that filter to the set.

Under Speed Dial programming set By Pass Restrictions =YES

------------------

Cygnal Technologies
sbwdaddy@yahoo.ca

[This message has been edited by Curlycord (edited February 13, 2005).]

[This message has been edited by Curlycord (edited February 13, 2005).]

I believe theres a filter code somewhere, because some C3060's can do it and others cant.

When its listed as Bypass Rest. = Y does that mean all phones can use that one? or just the phones i specify the filter on?

Bug

It applies to all sets that are restricted.

Okay, so this specific number is Bypass Rest. = Y but the companion gives you access denied.

How do u make this work w/out messing w/ its current no 9,9 for outside line and 9,9, 1xxx long distance

Bug

At home I programmed my 3060 as Prime Line- Intercom and used Restiction Filter 01.
I progammed speed dial code 012 as 1-705-555-5555 and told it to use Pool Code 92 and bypass restriction and it works fine.
My next question would be did you tell it what measure of dialing out would be? i.e. Pool or Routing code??

pool? routing code?

your talking to a novice