|
|
Joined: Jun 2003
Posts: 117
Member
|
|
Member
Joined: Jun 2003
Posts: 117 |
I just got a new customer who inherited an older Mics with T1(the original) software, and a 4- port copper Nam. I wiped out the info on the voicemail,and performed a startup on the Mics. Now I can not get anywhere with F983. "Password invalid".I was able to get into F983 b4 I initialized the system.Tried the F985...9 thing,to rest the password and no go. I also tried F983...xxxxxx. Need help on this one guys...Mike
[This message has been edited by JOHNYREB (edited February 18, 2005).]
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: Jan 2002
Posts: 2,328
Moderator-Comdial
|
|
Moderator-Comdial
Joined: Jan 2002
Posts: 2,328 |
Did you change your DN length?
|
|
|
|
|
Joined: Jun 2003
Posts: 117
Member
|
|
Member
Joined: Jun 2003
Posts: 117 |
It was 3 b4 I initialized and 3 after.
|
|
|
|
|
Joined: Mar 2002
Posts: 3,630
Moderator-Avaya, Nortel
|
|
Moderator-Avaya, Nortel
Joined: Mar 2002
Posts: 3,630 |
can you access it via a feature 901? Also, did you change any hardware on the MICS?
|
|
|
|
|
Joined: Aug 2004
Posts: 251
Member
|
|
Member
Joined: Aug 2004
Posts: 251 |
Have you tried the "Reset System Coordinator Password" ?
|
|
|
|
|
Joined: Nov 2004
Posts: 222
Member
|
|
Member
Joined: Nov 2004
Posts: 222 |
|
|
|
|
|
Joined: Feb 2005
Posts: 25
Member
|
|
Member
Joined: Feb 2005
Posts: 25 |
You said that you get "password invalid"? If you are getting this on a feature 983 than your NAM has defaulted and you will need to use the initial default password to reconfigure the nam.
When all else fails, Give someone else a try!
|
|
|
|
|
Joined: Feb 2005
Posts: 25
Member
|
|
Member
Joined: Feb 2005
Posts: 25 |
Sorry I just reread your post. Here is something to try. If none of your feature codes are responding try F**xftest. But first unplug power from the nam, then test all feature codes when they show inactive then remove them. When all are removed plug the nam back in.and it will reassign the codes again. Feature xftest will also show you if it has assigned the upper codes to the nam.
When all else fails, Give someone else a try!
|
|
|
|
|
Joined: Jun 2003
Posts: 117
Member
|
|
Member
Joined: Jun 2003
Posts: 117 |
Xftest is ok. F9*1 is ok. F983...invalid password. I am working with 2 digets. Reboot...reboot...reboot.Bottom line is I can not get into F983. Did the F985 "9" to reset password many times.The Atdt.in f982 is stuck at 2 digits. TOTAL FRUSTRATION...Mike
|
|
|
|
|
Joined: Oct 2004
Posts: 376
Member
|
|
Member
Joined: Oct 2004
Posts: 376 |
What do you mean the F982 is stuck at 2 digits it is default at "xxxxxxxx" or can be changed to between 4 and 8 digits
|
|
|
|
Forums84
Topics94,518
Posts639,974
Members49,849
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
304
guests, and
43
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
