|
|
Joined: Feb 2005
Posts: 1
Member
|
OP
Member
Joined: Feb 2005
Posts: 1 |
We just installed a Lineside T1 in our 81C. The problem is that it only supports Loop or Ground start and the vendors equipment only supports wink or immediate start. Is there a way I can convert the signaling to immediate or wink? Thanks for any help
|
|
|
|
|
Joined: Aug 2004
Posts: 1,477 Likes: 13
Admin
|
|
Admin
Joined: Aug 2004
Posts: 1,477 Likes: 13 |
I don't know what a "Lineside" T1 is, but why wouldn't you connect the T1 to a digital trunk card?
|
|
|
|
|
Joined: Nov 2004
Posts: 19
Member
|
|
Member
Joined: Nov 2004
Posts: 19 |
Lineside as it applies here is "station side"
I've used it for off premise extensions, instead of up to 24 copper OPX loops you can use T1 and "lineside T1" from the PBX.
|
|
|
|
|
Joined: Nov 2004
Posts: 19
Member
|
|
Member
Joined: Nov 2004
Posts: 19 |
sorry irishhooligan didn't address your question. Only thing that comes to mind is check with Adtran they build several sort of converter things. I once used a Definity to convert ground start lines to loop start to work on a customer new shiny Norstar while we waited on a PRI delivery. So anything is possible.
All else fails make the other guy convert or upgrade to meet your specs!!!!
|
|
|
|
Forums84
Topics93,879
Posts637,001
Members49,673
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
65
guests, and
58
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
![[Linked Image from web.atcomsystems.ca]](http://web.atcomsystems.ca/pic/atcom_logo_60px-high.png){kind=logo}