|
|
|
|
Joined: Feb 2005
Posts: 1
Member
|
|
Member
Joined: Feb 2005
Posts: 1 |
Does the M824X support caller ID as standard? Is it available as an additional card or anything?
I'm quite new to all of this, so sorry!
Many thanks
Alex
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: Aug 2004
Posts: 9,172 Likes: 22
Admin
|
|
Admin
Joined: Aug 2004
Posts: 9,172 Likes: 22 |
Unfamiliar with the 824x as it was just 824 stateside. If it is the same architechture then it will require a caller ID module from Nortel. Long discontinued I'm sure. I seem to remember it supported 8 loop start lines.
|
|
|
|
|
Joined: Oct 2004
Posts: 376
Member
|
|
Member
Joined: Oct 2004
Posts: 376 |
I think the module you need is called a "Call Identification Interface (CII). M8 is the one required for the KSU 8-24 There is a M6 for the 616 KSU. You might be able to find one on ebay. Or wait until you get a newer KSU. You also require a spare station port to connect it to.
|
|
|
|
|
Joined: Feb 2005
Posts: 4
Member
|
|
Member
Joined: Feb 2005
Posts: 4 |
You can get one (M8 or C6) from Williams
Call 18009823333 ask for patrick.
------------------
DocPhil
DocPhil
|
|
|
|
Forums84
Topics94,520
Posts639,987
Members49,850
| |
Most Online5,661
May 23rd, 2018
|
|
|
|
|
|
![[Linked Image]](https://sundance-communications.com/forum/images/559.jpg)
