|
|
|
|
Joined: Apr 2005
Posts: 7
Member
|
OP
Member
Joined: Apr 2005
Posts: 7 |
What kind of cable would I need to relocate the console 20 ft away from the phone system? Is it a standard serial cable? Is there any special pin out I should be aware of.
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: Aug 2004
Posts: 9,157 Likes: 16
Admin
|
|
Admin
Joined: Aug 2004
Posts: 9,157 Likes: 16 |
If it is a 2250 console you will need a standard 25 pair female amphenol cable.
|
|
|
|
|
Joined: Dec 2003
Posts: 2,086
Former Moderator-Nortel
|
|
Former Moderator-Nortel
Joined: Dec 2003
Posts: 2,086 |
Keep in mind for an Option-11 console, it uses a 25 pair cable. Out of that it is really only using 3 pairs and 5 ports. Two two pairs are for the DN and then uses three other ports for power. I just hooked up a console using the 25 pair cable from the console over to a 66-block. Then jumpered from there to a standard 4-pair jack. If you keep all the wiring straight you don't have to run 25-pair cable all the way back. Just use normal 4-pair cable.
If CON is the opposite of PRO
Then what is the opposite of Progress?
|
|
|
|
Forums84
Topics94,279
Posts638,738
Members49,764
| |
Most Online5,661
May 23rd, 2018
|
|
|
|
|
|
![[Linked Image]](https://sundance-communications.com/forum/images/559.jpg)