|
|
|
|
Joined: Mar 2002
Posts: 411
Member
|
|
Member
Joined: Mar 2002
Posts: 411 |
I'm trying to install a CICS with a 2 port Flash. The system was sitting in a box for a few years and I think something has happened to the software license. When I look at the version it tells me it's 30NfG00 NAT. It did work with this VM in the past. What can I do to get this working? Feature 983 states that it's inactive when I try to set up flash.
THanks
dave
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: Dec 2004
Posts: 27
Member
|
|
Member
Joined: Dec 2004
Posts: 27 |
You may have a couple things going on.
Are you connecting your VM to a port that is activated on the CICS. (ex. You have a x10 cics and you are connecting to port 19.
You also may need to reset your external feature codes. Have you ever done this?
Check to make sure your VM software is seated.
Good Luck
|
|
|
|
|
Joined: Apr 2002
Posts: 1,101
Member
|
|
Member
Joined: Apr 2002
Posts: 1,101 |
Try feature 9*1 and see if features are active.
It takes about 5 minutes for system to recognize voicemail after power-up.
Good Luck!!
If all else fails, use a BFH.
|
|
|
|
|
Joined: Mar 2002
Posts: 411
Member
|
|
Member
Joined: Mar 2002
Posts: 411 |
I think I might have been too impatient. I also did a feature 903 and it's happy now.
Thanks for the help
|
|
|
|
|
Joined: Dec 2004
Posts: 27
Member
|
|
Member
Joined: Dec 2004
Posts: 27 |
Yep, Remember the Basics.......
|
|
|
|
Forums84
Topics94,526
Posts640,017
Members49,852
| |
Most Online5,661
May 23rd, 2018
|
|
|
2 members (JBean3329, Toner),
400
guests, and
55
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
