sundance-communications.com/forum Forums TDM Business Telephone Systems Nortel Telephones & Systems Can't connect to Callpilot 100 over ethernet

The manual says you need to use the serial port of the IP address is incompatible with the network. I think the IP is fine, and that it's the other settings, subnet mask and/or gateway IP that make it not work.

Just to confirm what RBF said, these things connect just fine out of the box. Just make sure your PC address is 192.168.110.XXX with a subnet mask of 255.255.255.000

Toner, RBF, I agree, they do work fine when they come out of a FACTORY box. This one came from eBay. Perhaps that has something to do with it.


------------------
BCM Guy
www.BCMguy.com
Learn more about the Nortel Networks Business Communications Manager HERE !

Ah ha, NOW it makes sense...

You have to set the ip address in your brouser not let it try to auto asign one.

How do you set the ip in your browser if your browser can't communicate with it?

See toners post above
sqekgeak- what is your question? Are you asking how to change a computers IP address? That is all it takes to talk to the CP.

ARGHHHH...........How can a worldwide telecom company produce a product, have it installed by many legitimate companies and yet have a novice complain about not understanding the installing principles be given credibility? His previous posts show the inability to install the correct color code for tip and ring, the tying down of power cords to the backboard in violation of CSA/UL codes per install manual as well as various other accepted install errors and yet....nevermind. Goodnight.

------------------


Business Phone Systems

DaperDanMan:
It doesn't matter anway, I ended up changing the CP's IP and it worked. You're name reminds me of a great movie

Rather Be Fishing:
Tip and ring is obsolete
I purposefully rebelled against the standard

Tip & Ring aren't obsolete. You'd better not ignore it for too long, many systems are polarity sensitive. (Including Nortel's M1 and Centrex lines)