|
|
|
|
Joined: Aug 2005
Posts: 122
Member
|
OP
Member
Joined: Aug 2005
Posts: 122 |
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: Apr 2005
Posts: 26
Member
|
|
Member
Joined: Apr 2005
Posts: 26 |
Sqeaky, I think some basic knowledge of networks would have fixed your trouble. As toner stated above you have to be in the same address range as the device you are trying to connect to. Computers are default configured to accept an address given to them by a router or server. The callpilot does not have the ability to assign you an address therefore you must set that address yourself through the network settings of your computer. gateways and subnets are not important here as long as you are in the same ip range.
|
|
|
|
|
Joined: Aug 2005
Posts: 122
Member
|
|
OP
Member
Joined: Aug 2005
Posts: 122 |
Yes, the first three segments of the IP need to match, that is what threw me. The other things you mentioned I knew. I was wrong about the manual.
|
|
|
|
|
Joined: Apr 2005
Posts: 16
Member
|
|
Member
Joined: Apr 2005
Posts: 16 |
you can access the Callpilot using PC through RS232 port to check and change all parameters,including setting LAN port on or off ,IP address subnet marks and so on.
User:XXX
Password:XXXXXX
[This message has been edited by parker.xu (edited August 23, 2005).]
[This message has been edited by JOHNYREB (edited August 23, 2005).]
|
|
|
|
|
Joined: Aug 2005
Posts: 122
Member
|
|
OP
Member
Joined: Aug 2005
Posts: 122 |
parker:
I did that almost a week ago and reported that it was working fine. I'm not sure why this thread is still going.
|
|
|
|
Forums84
Topics94,291
Posts638,815
Members49,767
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
116
guests, and
436
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
