|
|
|
|
Joined: Aug 2005
Posts: 6
Member
|
|
Member
Joined: Aug 2005
Posts: 6 |
I am trying to add a new extension to my existing CCR tree. I have the greetings all recorded but one of them is new and is not actually in there yet. So I am in the CCR admin menu and I hit change and then it asks for the path number. So I enter 6-4 and it comes up with menu, info or other as options. I hit menu and it wants me to record a primary message. I just want to add the extension. How can I do this?
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: Aug 2005
Posts: 5
Member
|
|
Member
Joined: Aug 2005
Posts: 5 |
Choose other than xfer than int it will ask for then ext you wish to transfer to
|
|
|
|
|
Joined: Aug 2005
Posts: 6
Member
|
|
Member
Joined: Aug 2005
Posts: 6 |
Thank you. I had done it before but it was so long ago I could not remember.
|
|
|
|
|
Joined: Aug 2005
Posts: 4
Member
|
|
Member
Joined: Aug 2005
Posts: 4 |
You may already know this but I think you may have to disable before editing a CCR too.
|
|
|
|
|
Joined: Aug 2005
Posts: 6
Member
|
|
Member
Joined: Aug 2005
Posts: 6 |
Yes I did know that. Is there something different I have to do to enable it again though? Because the only instructions I have say that I have to go back in and hit disable again to enable it??
|
|
|
|
|
Joined: Aug 2005
Posts: 17
Member
|
|
Member
Joined: Aug 2005
Posts: 17 |
mfleischman-
that’s correct. It is a little confusing the first time you do it. You may also have to enter the number of the CCR tree you want to enable, but I cant remember that off the top of my head.
|
|
|
|
Forums84
Topics94,543
Posts640,074
Members49,857
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
126
guests, and
21
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
