Originally posted by cory:
I am being told by vendor that my Norstar can't take andvantage of NI-1 or NI-2 feature that allows PBX to output CLID on a per call basis. I want different extensions to show their DID number as CLID when they call out.
The outbound CLID
CAN be configured on a set-by-set basis. The caveat here is that the carrier must also pass along the info that you provide (some do, some don't). But, the Norstar will do it.
Originally posted by cory:
I would also like to be able to dial different access codes (line pool codes) and show a different caller ID or block caller ID.
Can Norstar PRI do this? thanks.
Not this part. It is configured set-by-set. If you had a pool of analog trunks, you could have the LEC send whatever would be appropriate for that particular pool of lines.
I hope that helps!
