sundance-communications.com/forum Forums TDM Business Telephone Systems Nortel Telephones & Systems Building internal DNs

hi i am new to the site and just want to know if someone can share on how to build dn's internal extensions on the meridian 61C, when i go to ld 20 and do prt , ludn i do not see any extensions starting on 43 , i have dn's that are started in 41, 42, 44, 45, 46, 47, 48 . These are regular internal extensions seperate from my DID's number.
I know this should be simple . Is this dn's internal extensions be build in ld 15 customer data block?

Is it possible that the whole 43 range is used up? What is your DN length? If you can, copy & paste the LUDN printout here.

i guess the installer did not use the 43 as it was being use before on the other building former hospital owner but now we are totally seperated from them and we should be able to use the 43 as we have no connection to the other building at all. How can i enable back this 43 so we can use it ?

I don't think I'll be able to help you unless you respond to my previous post.

CUSTOMER 00 - UNUSED DNS:
20 21 2200 2232 2233 2234 2235 2236 2237 2238
2239 224 2286 2287 2288 2289 2293 2294 2295 2296
2297 2298 2299 23 24 25 26 27 28 29
4137 4170 4181 4193 4195 4200 4220 4236 4239 4273
4284 4287 4299 4436 4439 4440 4443 445 446 447
448 449 4500 4507 4534 4566 4569 4581 4583 4584
4586 4587 4591 4600 4607 4629 4630 4633 4636 4641
4649 4658 4659 4662 4663 4664 4666 4668 4669 4670
4671 4672 4673 4674 4675 4676 4682 4683 4684 4685
4686 4687 4689 4691 4692 4693 4694 4695 4696 4699
4700 4705 4706 4707 4708 4709 4727 4741 4742 4743
4744 4745 4746 4747 4748 4749 4750 4751 4752 4753
4754 4755 4756 4758 4759 476 477 478 4790 4791
4792 4793 4794 4795 4796 4797 4798 4800 4815 4816
4817 4818 4819 4820 4821 4827 4828 4829 4834 4835
4836 4837 4838 4839 4840 4841 4842 4843 4844 4845
4846 4847 486 487 488 4892 4893 4894 4895 541
542 543 544 545 546 547 548 549 550 551
552 553 554 555 556 559 57 59 6104 6106
6107 6108 6109 611 612 613 6148 6149 615 616
617 618 6190 6191 6192 6193 6194 6195 6196 6197
6198 620 621 622 623 6248 6249 625 626 627
628 629 63 64 65 66 6820 6821 6825 6873
6890 69 76 79 80 810 811 812 813 814
8150 8151 8152 8153 8154 8156 8157 8158 8159 816
817 818 819 82 85 86 87 880 881 882
883 884 885 8860 8861 8862 8863 8864 8868 887
888 8892 8894 8896 8899 *0 *1 *2 *4 *5
*6 *7 *8 *9 #0 #5 #6 #7 #8 #9

You're right, 43 must be a routing code to reach the other building. The easiest solution would be to continue avoiding the 4300 DN's, but I assume you have a good reason not to do that.

I don't have a ton of experience with these things so I'm not sure I know how to remove the 43 code, but you could start by doing a PRT of the RDB in load 23 (I think) and posting the info here.

LD 20 and print the DNB 43. It will tell if it is a DSC,TSC, or other feature. From that I can tell you how you can use 43. RDB is in LD 21.

Thanks RBF