|
|
|
|
Joined: Apr 2005
Posts: 145
Member
|
|
Member
Joined: Apr 2005
Posts: 145 |
Ok, I've been through the archives, read and reread the documentation and haven't gotten anywhere! I am connecting with a cross over cable, I have the 10/100 lights on, The "easy set up wizard" doesn't come up as it is supposed to according to the instructions.
Communication Essentials
Newton, NJ
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: Oct 2005
Posts: 4,685 Likes: 4
Member
|
|
Member
Joined: Oct 2005
Posts: 4,685 Likes: 4 |
You do know you are supposed to set your pc in the correct ip range and then load your internet browser with the correct ip address of the call pilot.
Marv CCNA, CTUB
TeleMarv Services (Retired)
Providing telecommunication solutions in Ottawa Canada since 1990
|
|
|
|
|
Joined: Apr 2005
Posts: 145
Member
|
|
Member
Joined: Apr 2005
Posts: 145 |
I tried that.......at least I think I changed the IP address. Control panel, Network connections, properties.
I get NOTHING!
The LAN lights are lit on the CP so I know that is seeing the connection.
Thanks Marv
Beth
Communication Essentials
Newton, NJ
|
|
|
|
|
Joined: Jan 2002
Posts: 2,328
Moderator-Comdial
|
|
Moderator-Comdial
Joined: Jan 2002
Posts: 2,328 |
Many times people have several TCP/IP settings in their stack. If that's your case either delete all but one or address all entries.
|
|
|
|
|
Joined: Oct 2005
Posts: 4,685 Likes: 4
Member
|
|
Member
Joined: Oct 2005
Posts: 4,685 Likes: 4 |
Lights are on only means the correct cable is connected.
From the command prompt on your PC type ipconfig. This will tell you what your current IP address is.
Set static IP address on your PC/laptop:
Control Panel > Network Connection > Internet Protocol > Properties > Set IP address and Subnet to a range the CP will see
Marv CCNA, CTUB
TeleMarv Services (Retired)
Providing telecommunication solutions in Ottawa Canada since 1990
|
|
|
|
|
Joined: Feb 2005
Posts: 15
Member
|
|
Member
Joined: Feb 2005
Posts: 15 |
I typically set my IP properties to 192.168.110.11 with a subnet of 255.255.255.0. No gateway or DNS is required. Also, the browser must be configured to never dial a connection. If all else fails, you can connect a serial cable to the CallPilot using Hyperterminal at 9600/8/N/1 and VT 100, restart the CP and verify the IP address of the CP.
|
|
|
|
Forums84
Topics94,527
Posts640,019
Members49,852
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
155
guests, and
59
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
