|
|
|
|
Joined: Sep 2003
Posts: 10
Member
|
|
Member
Joined: Sep 2003
Posts: 10 |
I.m setting up several dnis numbers for a mics 6.0, the current t-1 has been up and running and working fine, the customer has several 800's that we are going to route through the t-1 so I have set the dnis in line programming to y and setup target lines 145 - 147 to match the 7 digits that the provider is sending and have those routed to the correct stations, is there any other program setting for setting up dnis numbers.
thanks
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: Aug 2006
Posts: 254
Member
|
|
Member
Joined: Aug 2006
Posts: 254 |
Did you set the primeset on the target lines to the sets?
|
|
|
|
|
Joined: Mar 2001
Posts: 3,869
Member
|
|
Member
Joined: Mar 2001
Posts: 3,869 |
And enough paths to handle more than one call at a time?
THE Bracha, old blond specialist in Rube Goldberg solutions.
|
|
|
|
|
Joined: Sep 2003
Posts: 10
Member
|
|
Member
Joined: Sep 2003
Posts: 10 |
Yes, on the prime set and I setup 8 positions on each of the lines, I failed to mention that these lines are set to E & M and winkstart. I think my mistake is that I failed to turn on auto answer in line programming. I haven’t been able to try it but could this be the issue.
|
|
|
|
Forums84
Topics94,553
Posts640,115
Members49,861
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
23
guests, and
64
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
