|
|
Joined: Feb 2003
Posts: 177
Member
|
|
Member
Joined: Feb 2003
Posts: 177 |
Does anyone know of any issues with PRI on a MICS 4.1? I'm proposing a PRI install and I'm wondering if I should include a software upgrade as well. If so, which software rev. is the best to go with?
Thanks
Chris
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: Jan 2005
Posts: 826
Member
|
|
Member
Joined: Jan 2005
Posts: 826 |
Hi Chris, I don't have the sheet in front of me, but it seems like the latest revision of 4.1 is G15. If that is what you're on, I think you'll be OK. However, Nortel no longer supports 4.1. So, if that is important to you, you'll want to jump up to 6.1 (a later release of that as well  ). Good Luck!
|
|
|
|
|
Joined: Feb 2006
Posts: 598
Member
|
|
Member
Joined: Feb 2006
Posts: 598 |
On 4.1 and 4.0 we have had the target line programming disappear on us a couple of times, on 2 different sites. It involved power bumps and restarts, but 4.1 is way better than 4.0. I would include the upgrade to 7.0, but that is just me.
Two girls later and I'm back.....lol...been gone a while but see same faces still here. Lol
|
|
|
|
|
Joined: Jan 2005
Posts: 826
Member
|
|
Member
Joined: Jan 2005
Posts: 826 |
Originally posted by Nickels:
I would include the upgrade to 7.0, but that is just me. That is me too. I should have said, at least 6.1. :thumb:
|
|
|
|
|
Joined: Oct 2005
Posts: 4,685 Likes: 4
Member
|
|
Member
Joined: Oct 2005
Posts: 4,685 Likes: 4 |
You'll probably have to upgrade the voice mail too.
Marv CCNA, CTUB
TeleMarv Services (Retired)
Providing telecommunication solutions in Ottawa Canada since 1990
|
|
|
|
|
Joined: Feb 2003
Posts: 177
Member
|
|
Member
Joined: Feb 2003
Posts: 177 |
|
|
|
|
|
Joined: Aug 2003
Posts: 5,155 Likes: 5
Moderator-Vertical, Vodavi
|
|
Moderator-Vertical, Vodavi
Joined: Aug 2003
Posts: 5,155 Likes: 5 |
Originally posted by Nickels:
On 4.1 and 4.0 we have had the target line programming disappear on us a couple of times, on 2 different sites. It involved power bumps and restarts, but 4.1 is way better than 4.0. I would include the upgrade to 7.0, but that is just me. I had the same problem with 4.1 on a T-1. Also, make sure you don't have a NVRAM version 1. Have them upgrade, it's only money...
|
|
|
|
|
Joined: Aug 2006
Posts: 254
Member
|
|
Member
Joined: Aug 2006
Posts: 254 |
I would purchase 7.0. When you purchase it, it should come with the NVRAM V2. If you have a pre 4.1 NAM, just upgrade the NAM to 4.1 (it works with 7.0). Thats what I would do.
|
|
|
|
Forums84
Topics94,518
Posts639,974
Members49,849
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
268
guests, and
57
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
