|
|
Joined: Jun 2004
Posts: 18
Member
|
OP
Member
Joined: Jun 2004
Posts: 18 |
Some weeks back I posted about a block I'd seen that none of my usual bits would fit. While it looks like a 110, not a 110, BIX, nor Krone fit. I ran across another of these blocks the other day and saw "Northern Telecom" embossed on the top of the block. My partner happened to be in the area and he stopped by. He is Nortel certified and pulled out a bit that he got from Nortel. While it looks like a BIX, it has 2 open slots in the middle of it, and it fit the block perfectly. Unquestioningly this is a proprietary Nortel tool. My partner isn't sure if he has another of these bits, so I'm wondering if anyone has a source for such a bit? In the meantime my only way to punch these blocks is to hillbilly it with a small screwdriver and push the wire into the block and hope for connection. Not my preferred way to go. The right tool is always the right way  TIA
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: Jul 2005
Posts: 1,829
Member
|
|
Member
Joined: Jul 2005
Posts: 1,829 |
what i am thinking is you ran into the older terminals wich are called jwi terminals
jwi (jumper wire interface the tool is made by 3 m i will try to get a picture and see if its this one
|
|
|
|
|
Joined: Jul 2005
Posts: 1,184
Member
|
|
Member
Joined: Jul 2005
Posts: 1,184 |
it has 2 open slots in the middle of it You just described a normal Northern Telecom issued BIX tool.
|
|
|
|
|
Joined: Oct 2005
Posts: 4,685 Likes: 4
Member
|
|
Member
Joined: Oct 2005
Posts: 4,685 Likes: 4 |
Yep that's an original BIX tool and the only one I use. If you want to get one, it's now made by Nordx. Most of you guys south of the border are used to seeing BIX bits that fit multiple headed generic tools made by some else.
Marv CCNA, CTUB
TeleMarv Services (Retired)
Providing telecommunication solutions in Ottawa Canada since 1990
|
|
|
|
|
Joined: Jun 2004
Posts: 18
Member
|
|
OP
Member
Joined: Jun 2004
Posts: 18 |
Thanks for the replies. I'll try a Nordx search, unless you have a better suggestion on a source.
|
|
|
|
|
Joined: Oct 2004
Posts: 376
Member
|
|
Member
Joined: Oct 2004
Posts: 376 |
Ya I got a suggestion - DONT use a screw driver it wrecks the strip.
|
|
|
|
|
Joined: Oct 2004
Posts: 376
Member
|
|
Member
Joined: Oct 2004
Posts: 376 |
The number thats on my Bix tool is QT Bix 16A
I seem to remember Bix had a thow away tool made out of plastic that was used for the guy hooking up the odd one.
|
|
|
|
|
Joined: Jul 2005
Posts: 1,829
Member
|
|
Member
Joined: Jul 2005
Posts: 1,829 |
ive actually used a butter knife when i lost or forgot my tool somewhere but this method is just to save yer but kinda thing
|
|
|
|
|
Joined: Jul 2005
Posts: 36
Member
|
|
Member
Joined: Jul 2005
Posts: 36 |
Using anything other than the proper tool is crazy. The whole idea is to have the IDC termination. Use the correct tool.
Plastic BIX tool only good for around 10 terminations, buy the real Nordx tool.
|
|
|
|
|
Joined: Apr 2005
Posts: 153
Member
|
|
Member
Joined: Apr 2005
Posts: 153 |
Beer, sure I'll try one
|
|
|
|
Forums84
Topics94,293
Posts638,829
Members49,768
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (Professor Shadow),
144
guests, and
221
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
