|
|
|
|
Joined: Mar 2005
Posts: 19
Member
|
OP
Member
Joined: Mar 2005
Posts: 19 |
I have a Nortel 81C PBX tied to a MICS with a Point to Point PRI circuit. When I call from the 81C to an extension on the MICS, I am not hearing dialtone. The issue seems to be on the MICS because I can call other MICS, BCMs, and Option 11Cs from our 81C and I hear dialtone.
Any suggestions where to look on the MICS?
Thanks in advance!
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: Apr 2001
Posts: 1,390
Member
|
|
Member
Joined: Apr 2001
Posts: 1,390 |
Still not clear on how the "other mics" is producing dial tone.
Do you mean you are able to access local co trunks from the remote sites?
Check to see how the "other mics" that is working and configure the same way.
|
|
|
|
|
Joined: Mar 2005
Posts: 19
Member
|
|
OP
Member
Joined: Mar 2005
Posts: 19 |
Problem seems to be the way this system is setup using PRI. This is the first MICS we have as PRI and I am not sure if we have our RDB in the 81C configured correctly. Does any one have an example on how to program the RDB, Trunks, and DCH in the 81C?
Thanks in advance!
|
|
|
|
Forums84
Topics94,296
Posts638,846
Members49,769
| |
Most Online5,661
May 23rd, 2018
|
|
|
2 members (C5Z, justbill),
163
guests, and
286
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
