|
|
|
|
Joined: Oct 2004
Posts: 37
Member
|
|
Member
Joined: Oct 2004
Posts: 37 |
I have a BCM 1000 and can access the programming through telset. The gui interface password has been changed and I don't know what that password was changed to. Is there a way to reset the gui password through telset?
If your not having fun, go find something else to do.
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: Oct 2004
Posts: 37
Member
|
|
Member
Joined: Oct 2004
Posts: 37 |
Sorry guys the software revision is 3.6
If your not having fun, go find something else to do.
|
|
|
|
|
Joined: Jan 2005
Posts: 826
Member
|
|
Member
Joined: Jan 2005
Posts: 826 |
No, there isn't a way to reset the UM password via telset.
Even worse, telset administration is NOT supported in version 3.6. Yes, it can be accessed, but making configuration changes through the telset interface is KNOWN to cause corruption. If you have redundant harddrives, the corruption will mirror across both disks. I have replaced a lot of harddrives (prior to the availability of the BIT tool) due to other vendors programming via the telset interface.
|
|
|
|
Forums84
Topics94,551
Posts640,100
Members49,861
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
152
guests, and
24
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
