sundance-communications.com/forum Forums TDM Business Telephone Systems Nortel Telephones & Systems CICS Analog conference call?

Are we able to make a conference call from an analog port...External and Internal?

Im curently trying to, but when im in conversation with another extension or an external line, when i press flash, i dont get another dial tone, after 3 seconds its bringing me back to the conversation

i put 2 intercom, line supervision, line acesss

any idea?

You can do a conference call. You need to hit flash *3, it will put that caller on hold, call the next person once you are talking again hit flash *3. As an FYI, most times if you need a conference call, make it from a 7208 or 7310, then park the call and pick it up on the cordless.

im not able to put the call on hold, when i hit flash *3,, nothing happend and i come back to the conversation after 3 sec....

You probably have Flash at CO set to yes. It must be no for analog port to work correctly.

The sequence for conference is:

Establish your first call.
Press Flash 2 to place call on hold.
Establish your second call.
Press Flash *3 to establish the conference.