Paging over i2004 IP phones at remote site?

Print Thread

Rate Thread

Paging over i2004 IP phones at remote site? #132466 03/14/07 11:06 AM
Joined: Aug 2005 Posts: 56 Aurora,CO,USA Phoneaholic Member
Phoneaholic Member Joined: Aug 2005 Posts: 56 Aurora,CO,USA	Hi everyone! System: BCM 400 3.7 with 20 digital sets at BCM location. 8 i2004 IP phones at location B. I have all IP phones programmed in page zone 3. Once in a while, you can page the IP phones but most often, all you hear is the beep and voice. I tried just programming 3 IP phones in page zone 3 with same result. Does anyone know of a simple offsite paging solution over IP? Thank you, Dan If I only had more time to golf!

Nortel Phone System Service

Nortel Phone System Service in Canada

Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.

Re: Paging over i2004 IP phones at remote site? #132467 03/14/07 11:38 AM
Joined: Aug 2005 Posts: 56 Aurora,CO,USA Phoneaholic Member
Phoneaholic Member Joined: Aug 2005 Posts: 56 Aurora,CO,USA	Whoops! Sorry, All you hear is the beep and NO voice. Thanks again, Dan If I only had more time to golf!

Re: Paging over i2004 IP phones at remote site? #132468 03/14/07 02:38 PM
Joined: Mar 2005 Posts: 245 TN, USA Crowtalks Member
Crowtalks Member Joined: Mar 2005 Posts: 245 TN, USA	What happens when you delay speaking two or three seconds after pressing the page button? Paging across IP sets has always been a problem with the BCM. NCSS NCTS NCTE CS1000E 5.5 CallPilot 5.0 MITEL 5000 3300 NuPoint "If I had known it would turn out like this, I would have become a locksmith" Albert Einstein

Re: Paging over i2004 IP phones at remote site? #132469 03/15/07 11:09 AM
Joined: Aug 2005 Posts: 56 Aurora,CO,USA Phoneaholic Member
Phoneaholic Member Joined: Aug 2005 Posts: 56 Aurora,CO,USA	You can speak for as long as you want and no voice is heard. Once in a great while, a page will work if your'e lucky. If I only had more time to golf!

Re: Paging over i2004 IP phones at remote site? #132470 03/15/07 03:40 PM
Joined: Mar 2005 Posts: 245 TN, USA Crowtalks Member
Crowtalks Member Joined: Mar 2005 Posts: 245 TN, USA	That's od...is this BCM fully patched? NCSS NCTS NCTE CS1000E 5.5 CallPilot 5.0 MITEL 5000 3300 NuPoint "If I had known it would turn out like this, I would have become a locksmith" Albert Einstein

Moderated by MooreTel

Hop To

Link Copied to Clipboard

sundance-communications.com/forum Forums TDM Business Telephone Systems Nortel Telephones & Systems Paging over i2004 IP phones at remote site?