|
|
|
|
Joined: Jan 2006
Posts: 28
Member
|
|
Member
Joined: Jan 2006
Posts: 28 |
Can anyone tell me how to change the LInes on a new add on module in the line config area from Voip to loop start lines? I have a twoport fiber exspaner.
:confused: :confused:
John Keiper
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: Dec 2003
Posts: 2,086
Former Moderator-Nortel
|
|
Former Moderator-Nortel
Joined: Dec 2003
Posts: 2,086 |
You are adding a trunk card in an Exp Trunk module?? Have you gone under Hardware and configured that module for the right kind of Card??
If CON is the opposite of PRO
Then what is the opposite of Progress?
|
|
|
|
|
Joined: Jul 2005
Posts: 1,829
Member
|
|
Member
Joined: Jul 2005
Posts: 1,829 |
voip lines on a norstar???
|
|
|
|
|
Joined: Feb 2007
Posts: 2,473
Member
|
|
Member
Joined: Feb 2007
Posts: 2,473 |
Never new there is VOIP choice of Trunks in MICS. But maybe you are talking about BCM? Then you have to go to Hardwere and change Module type.
|
|
|
|
|
Joined: Mar 2001
Posts: 3,268
Member
|
|
Member
Joined: Mar 2001
Posts: 3,268 |
I believe ports 097 to 144 are set up for "VOIP". Check where your C.O. line ports are. They should be before that, 001 to 049 or 049 to 096. I think I've had the PRIs on 001 to 049, before. Check the ports.
|
|
|
|
Forums84
Topics94,557
Posts640,130
Members49,862
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
73
guests, and
53
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
